Library

Fact sheet providing an overview of the FEMA document Wind Retrofit Guide for Residential Buildings.

Report summarizing the requirements to strenghthen new homes against property damage caused by high wind occurrences per the IBHS Fortified Homes High Wind Standard for New Homes.

Fact sheet summarizing the changes to the flood provisions in the 2012 I-Codes that appear in the 2015 edition.

Florida building code including all the amendments and additions by Florida for the wind-borne debris regions and the high-velocity hurricane zone.

Report summarizing the requirements for strenghtening and protecting the roof, openings in the house, and creating a continuous load path to strengthen walls and foundation per the IBHS Fortified Homes Hurricane Standard for New Homes.

Guide describing the requirements by FORTIFIED Home™ for improving the home's resistance in severe thunderstorms, straight-line wind events, and high winds at the outer edges of tornadoes.

Guide describing the requirements by FORTIFIED Home™ for improving the home's resistance in severe thunderstorms, straight-line wind events, and high winds at the outer edges of tornadoes.

Document containing a series of resource papers that describe earthquake design components, including shear walls, resiliency, ground motion, and story drift and deflection, among others.

Article describing vapor retarder requirements in the International Residential Code and International Building Code 2021.

Article describing ways builders can improve the hurricane resistance of the homes they construct, especially 1) strengthening the continuous load path, 2) upgrading the building envelope, and 3) improving the roof system performance.

Report providing builders in the hot-dry and mixed-dry climates with guidance for building homes that have whole-house energy savings of 40% over the Building America benchmark with no added overall costs for consumers.

Article from the Sierra Club explaining 5 steps to take to ensure your home's resistance to wildfires, including site maintenance and roof construction guidelines.

Article describing thermal bridging, construction practices that encourage thermal bridging, and solutions.

Article describing methods for venting a vented attic and a roof assembly over an unvented attic.

Report describing the results of a field study of five different ventilation system types in 29 homes in the Pacific Northwest.

Report describing an air distribution system composed of a series of uniformly-sized ducts that terminate in rooms throughout the home and return to a central manifold, similar in fashion to a “home-run” cross-linked polyethylene plumbing system.

Guide developed to help contractors, building operators, and city officials successfully adopt cool roof and pavement technology.

Energy Star web page providing guidance on attic ventilation.

Report examining the structural properties and applications of an innovative studless building system, detailing its testing regime and providing an engineering guide for architects and engineers.

Article describing how to detail head flashing above a window.

Document describing adobe construction, its weakness to earthquakes, and techniques used to improve seismic resistance for both new construction and existing adobe buildings.

Printed manual describing adobe construction

Report on the design and evaluation of extended plate and beam.

Case study on the design and evaluation of extended plate and beam, located in Mount Joy Pennsylvania.

Guide describing advanced framing, a system of construction framing techniques designed to optimize material usage and increase energy efficiency.

Report describing advanced framing techniques, including discussion of cost and energy savings.

Fact sheet describing advanced wall framing.

Report (1) compares existing measurement methods, based on field testing in a wide range of buildings, (2) presents the development of two new methods to directly measure exterior and interior leakage of an attached unit, and compares to existing methods; and (3) experimentally evaluates the...

Technical report describing the SPS (Structural Panel System), an innovative implementation of the "perfect wall" concept, situating environmental control layers on the exterior side of structural components for improved constructability, cost-effectiveness, and performance, validated through the...

Brochure about creating an air barrier by sealing drywall assemblies.

Brochure about creating an air barrier at tub, shower and fireplace walls.

Report describing two retrofit duct sealing techniques - manually-applied sealants and injecting a spray sealant, that were implemented in several low-rise multi-unit buildings in North Carolina.

Fact sheet describing air-sealing concerns and remedies, including HRV/ERV installation, caulking, spray foam, and weatherstrip installation.

Article describing how an airtight home shell helps achieve a tight envelope that is energy efficient and cost effective.

Manual describing best practices or home construction in Alaska and northern climates.

Website article interviewing the inventor of the Larsen truss, a history of its use, and a discussion of its advantages and disadvantages.

Article about different types of weather resistant barrier.

Report on adding insulation to load-bearing mass masonry buildings.

ASHRAE Standard prescribing an field evaluation and test method to measure and score the performance of unitary HVAC systems.

This ANSI/RESNET/ICC standard provides a consistent, uniform methodology for evaluating the airtightness of building, dwelling unit, and sleeping unit enclosures and heating and cooling air distribution systems, and the air flows of mechanical ventilation systems.

Standard covering updates to the expected leakage rates for ductwork constructed to the SMACNA HVAC Duct Construction Standards—Metal & Flexible, duct leakage test procedures; includes recommendations on use of leakage testing, types of test apparatus, and test setup and sample leakage analysis.

A publication highlighting recommendations that contribute to improved overall performance in the structural shell and focus on good connection details to tie together exterior walls, roofs and floors.

Webpage providing mapping tool for obtaining ground snow load, based on ASCE 7-10, for any location in the contiguous United States, with the exception of locations requiring a case study due to extreme local variations in ground snow loads. Fee required for some data.

Technical fact sheet describing ways to construct asphalt shingle roofs to be more resistant to high winds and hurricanes; also published in FEMA P-499 “Home Builder’s Guide to Coastal Construction: Technical Fact Sheet Series.”

A report that evaluates the force it takes to crack stucco of various thicknesses.

Standard establishing test methods for determining air leakage in duct systems using fan pressurization in low-rise residential and commercial buildings.

Report about a project that examines implementation of advanced retrofit measures in the context of a large-scale weatherization program and the archetypal Chicago, Illinois, brick bungalow.

This report outlines research activities that are expected to facilitate the adoption of energy retrofits by remodeling contractors and roofing contractors using retrofit panels which applicable to many existing house designs in most climates and markets.

Report covering interior energy retrofits of masonry buildings.

Technical article describing issues and moisture concerns related to weatherization efforts.