Library

Article describing products that can enhance the efficiency and safety of clothes dryer vents.

Report providing builders in marine climates with guidance for building homes that have whole-house energy savings of 40% over the Building America benchmark with no added overall costs for consumers.

Technical fact sheet describing ways to construct asphalt shingle roofs to be more resistant to high winds and hurricanes; also published in FEMA P-499 “Home Builder’s Guide to Coastal Construction: Technical Fact Sheet Series.”

Document providing background and approach for the prep work necessary prior to adding attic insulation - focusing on combustion safety, ventilation for indoor air quality, and attic ventilation for durability.

Article describing different kinds of water-resistant backer boards.

Document providing an example procedure for establishing acceptance-range criteria to assess results from software undergoing BESTEST-EX.

Report describing ventilation system design, including a central fan integrated supply (CFIS) system, made up of a 6-inch outdoor air intake duct connected to the return side of the air handler with a fan cycling control to make sure the fan runs a programmed minimum amount of time.

Fact sheet describing the characteristics that make for a successful coastal residential building, including design and construction recommendations; also published in FEMA P-499 “Home Builder’s Guide to Coastal Construction: Technical Fact Sheet Series.”

Installation manual describing proper installation practices, industry standards and the code requirements of roofing tiles.

Information about dense pack, cellulose insulation.

Information sheet with HVAC duct insulation, testing, maintenance and performance information.

Report providing an introduction to the NEHRP recommended seismic provisions for new buildings and other structures.

The objective of this research was to quantify the field performance of wood-frame walls clad with a variety of common claddings in a mixed-humid climate.

Fact sheet describing requirements and recommendations for enclosures and breakaway walls for their use below the BFE, including a diagram of a compliant wall system and examples of systems that have either resulted in increased damages or increased flood insurance premiums; also published in FEMA P...

Paper describing the effects of tree shade on residential electricity consumption and energy savings in summer and winter.

Report evaluating the accuracy of the regression technique used in 2006 by using the same least-squares regression analysis on data created from hourly energy simulation software.

Document providing an example procedure for establishing acceptance-range criteria to assess results from software undergoing BESTEST-EX.

Report on the performance of range hood exhaust fans.

Report presenting the process of a residential retrofit project for houses in the states of Florida and Alabama, including findings at the time of reporting and highlights of the first home to meet the target HERS Index of 70.

Article from Building Science Corporation on construction techniques for extreme heat conditions in Dubai and Las Vegas.

Map of the wind-borne debris region of Florida

Webpage from Washington State Department of Health describing how to use backup generators properly to not overload during a power outage.

Document that gives a step-by-step approach for designing attachments for cladding materials through foam sheathing.

Information sheet about air barriers.

Brochure describing insulation and air-sealing details.

Report containing 37 fact sheets that provide technical guidance and recommendations concerning the construction of coastal residential buildings.

A guide that summarizes building materials and design considerations for increasing wildfire-resistivity of homes in areas that are prone to wildfires.

Report describing the hurricane retrofit guide with focus on walls and wooded framed walls.

Ignition resistant residential construction and landscaping guidelines from FireSafe Montana.

The purpose for this document is to provide basic guidance on the use of proven installation techniques that can be used by installers to help ensure correct “dense pack” application of JM Spider® in drill & fill applications.

EPA’s 2008 Lead-Based Paint Renovation, Repair and Painting (RRP) Rule (as amended in 2010 and 2011), aims to protect the public from lead-based paint hazards associated with renovation, repair and painting activities.

Factsheet describing the concept of load paths and the important connections in a wind uplift load path; also published in FEMA P-499 “Home Builder’s Guide to Coastal Construction: Technical Fact Sheet Series.”

Document presenting a cost effective method that was used by four builders in the Gainesville, FL area to construct interior ducts in over a dozen site built homes.

If your kitchen has a powerful exhaust fan, it may be pulling air down your chimney or water-heater flue.

Document describing a hygrothermal modeling study, including all of the US climate zones, a range of interior humidity levels and numerous arrangements and types of insulation.

Information sheet about mold mitigation.

Report describing the interactions, both positive and negative, between common green building practices and the robustness of residential buildings to withstand natural hazards.

Building science insight into crawlspaces.

Standard providing a procedure for determining fenestration attachment product U-factors.

Standard for determining fenestration attachment product SHGC and visible transmittance.

Report providing quick reference guide information to help a family prepare for hurricane season, including seven steps to a wind resistant home, a wind inspection checklist, and how to find a contractor.

Report highlighting the evaluation methods used and extent of wind washing found in a study analyzing wind washing in thirty-two two-story homes.

Standards for paints and coatings.

Paper examining the monitored performance of four newly constructed near zero energy homes in Florida.

Report briefly reviewing past research on the effects of occupant behavior on residential energy use and then covering a two year pilot evaluation of a low cost residential energy feedback system installed in twenty case study homes in Florida.

An example of a form a building codes department created to ensure builders are fully aware and have taken steps to provide drainage so that water doesn’t accumulate behind siding. This example is from the city of Newberg, Oregon.

Information sheet describing refrigerant line installation and system startup procedures.

Fact sheet describing NFIP requirements for repairs, remodeling, and additions, and discussing opportunities for retrofitting in coastal flood hazard areas with recommendations for exceeding the minimum NFIP requirements; also published in FEMA P-499 “Home Builder’s Guide to Coastal Construction...

Presentation providing information about correctly installing ductwork in new and existing homes.

Paper covering a parametric study of foundation heat exchanger-based ground source heat pump systems for several house configurations in a range of European locations, with an emphasis on determining feasible combinations.