Skip to main content

Showing 1 - 17 of 17 results:

Publication Date
·
Author(s)
Bailey Ronald B,
Swanson Hollace J
·
Organization(s)
BEC
Description
Case study about high humidity, mold and condensation on surfaces in S. Florida, and how building characteristics cause and amplify these problems.
Publication Date
·
Author(s)
U.S. Consumer Product Safety Commission
·
Organization(s)
USCPSC
Description
Updated detailed information about Formaldehyde.
Publication Date
·
Author(s)
The Cadmus Group
·
Organization(s)
U.S. Department of Housing and Urban Development,
HUD
Description
This is a guide for establishing smoke-free policies in public housing and multifamily properties.
Publication Date
·
Author(s)
Building Performance Institute
·
Organization(s)
BPI
Description
Fact sheet that details the steps needed to perform a combustion appliance safety inspection to determine if fossil fuel-fired appliances are operating safely under a depressurized condition.
Publication Date
·
Author(s)
Walker Iain S,
Turner William JN
·
Organization(s)
Lawrence Berkeley National Laboratory,
LBNL
Description
This study evaluates the energy, humidity and indoor air quality implications of residential ventilation cooling in all US IECC climate zones.
Publication Date
·
Author(s)
U.S. Environmental Protection Agency
·
Organization(s)
EPA
Description
This publication provides a set of best practices for improving indoor air quality in conjunction with energy upgrade work in homes.
Publication Date
·
Author(s)
Maxwell Sean,
Berger David,
Zaluga M
·
Organization(s)
Consortium for Advanced Residential Buildings,
CARB,
U.S. Department of Energy,
DOE
Description
Technical report describing the evaluation of four different ventilation strategies for providing make-up air in high-performance, new construction multifamily buildings in the Northeast, emphasizing the challenges posed by increasing airtightness standards and the variability of system performance...
Publication Date
·
Author(s)
U.S. Environmental Protection Agency
·
Organization(s)
EPA
Description
Detailed information about Formaldehyde including health effects and strategies to reduce exposure.
Publication Date
·
Author(s)
Lstiburek Joseph W
·
Organization(s)
Building Science Corporation
Description
Article describing the impact of stack effect on building performance, highlighting how pressure differences caused by temperature and height affect air infiltration and exfiltration, and detailing strategies like compartmentalization and distributed mechanical systems to manage airflow and maintain...
Publication Date
·
Author(s)
Aldrich Robb
·
Organization(s)
Consortium for Advanced Residential Buildings,
CARB,
Steven Winter Associates,
SWA,
U.S. Department of Energy,
DOE
Description
This document addresses adding—or improving—mechanical ventilation systems to existing homes. The purpose of ventilation is to remove contaminants from homes either directly or by dilution. This report discusses where, when, and how much ventilation is appropriate in a home, including some...
Publication Date
·
Author(s)
Canadian Standards Association International
·
Organization(s)
CSA International,
CSA Group
Description
Standard covering provisions for electrically operated single- and multiple-station carbon monoxide (CO) alarming devices used in various types of residential occupancies to protect against acute effects of exposure to CO. This version of the standard, originally published in 2001 and revised in...
Publication Date
·
Author(s)
German Alea,
Siddiqi Aqdus,
Dakin Bill
·
Organization(s)
Alliance for Residential Building Innovation,
ARBI,
Davis Energy Group,
U.S. Department of Energy,
DOE
Description
Research project evaluating the pre-and post-retrofit energy consumption of a marine climate retrofit, compare actual energy use to original predictions, and identify opportunities for cost savings in other similar retrofits in this climate.