Library

Web article describing common issues that can cause refrigerant system flare joints to leak.

2009 edition of code establishing minimum regulations for plumbing facilities, including fixtures, water heaters, water supply and distribution, sanitary drainage, storm drainage, etc.

2012 edition of code establishing minimum regulations for plumbing facilities, including fixtures, water heaters, water supply and distribution, sanitary drainage, storm drainage, etc.

2015 edition of code establishing minimum regulations for plumbing facilities, including fixtures, water heaters, water supply and distribution, sanitary drainage, storm drainage, etc.

2018 edition of code establishing minimum regulations for plumbing facilities, including fixtures, water heaters, water supply and distribution, sanitary drainage, storm drainage, etc.

Federal statistics about national energy consumption in residential homes in 2020

Performance rating standards for unitary air-conditioners and unitary air-source heat pumps, including definitions, classifications, testing, rating, and operating requirements, as well as minimum data requirements for published ratings and markings.

Guidebook covering basic principles and data used in the HVAC&R industry. This is the 2023 edition of the handbook, which can be purchased physically or digitally at the reference link in versions using either I-P units of measurement or SI units of measurement.

Website containing commercial information related to air conditioning and heating.

Website homepage for the Air Conditioning Contractors of America (ACCA).

Standard covering equipment sizing loads for single-family-detached homes, small multi-unit structures, condo­miniums, town houses and manufactured homes.

Standard covering sizing strategies for all types of cooling and heating equipment, as well as how to use comprehensive manufacturer’s performance data on sensible, latent, or heating capacity for various operating conditions.

Standard providing nationally recognized, manufacturer-endorsed set of inspection tasks for HVAC maintenance.

Standard providing a universally accepted definition for quality installation for residential and commercial heating, ventilating, and air conditioning applications.

Document detailing the requirements, roles, and obligations for participants in an organized effort, ensuring that HVAC installations comply with the ANSI/ACCA 5 QI – 2010 (HVAC Quality Installation Specification) QI Standard.

Fact sheet describing air-sealing concerns and remedies, including HRV/ERV installation, caulking, spray foam, and weatherstrip installation.

This is a federal tax credit for complying air source heat pumpe. Units located in the "North" must meet ENERGY STAR's cold climate heat pump criteria.

Document providing step-by-step guidance to sizing air-source heat pumps for a cold climate.

Webpage describing the functionality and benefits of switching to Air Source Heat Pumps, as well as linking to sets of products, rebates, most efficient ASHPs, and providing consumer aid for purchasing an ASHP.

Fact sheet describing the research on energy-efficient strategies for small single-story homes, including manufactured and Habitat for Humanity-built homes, utilizing mini split ductless heat pumps and through-wall transfer fans to achieve a 50% reduction in energy consumption compared to the 2009...

Technical report describing the integration of mini split ductless heat pumps and through-wall transfer fans in small single-story homes, to achieve a 50% reduction in space conditioning energy consumption compared to the 2009 International Energy Conservation Code, while ensuring affordability and...

Report about two test home evaluations that provided valuable data about the true in-field performance of various building mechanical systems and LAMELs.

Report about a building project in the marine climate.

Report describing a field investigation of failure rates of whole-house mechanical ventilation systems installed in Florida homes.

Article describing how demand plumbing systems send cold water back to the water heater until hot water arrives at the sink, shower or other fixture where it is needed.

Case study describing solar thermal and photovoltaic systems in new construction.

Article describing the common ventilation system types, issues, and solutions in New York City's multifamily residential buildings to improve indoor air quality, occupant health, and building durability.

This directory contains the I=B=R Ratings for cast-iron, steel, aluminum and copper boilers, baseboard and finned tube radiation, indirect-fired water heaters, effective as of the date of this publication.

Code establishing the rules of safety relating only to pressure integrity for the design, fabrication, and inspection of boilers and pressure vessels during construction which was published in the year 2017 and is available to order at the referenced link.

Code establishing the rules of safety relating only to pressure integrity for the design, fabrication, and inspection of boilers and pressure vessels during construction which was published in the year 2021 and is available to order at the referenced link.

Information sheet offering general recommendations on supplemental humidity control and outlines viable system configurations.

Report describing the recommended best practices to achieve energy savings without compromising health or safety.

Case study describing solar thermal and photovoltaic systems in new construction.

Case study describing solar thermal and photovoltaic systems in new construction.

Document describing the Building America research benchmark for the residential building program.

Web report explaining how correct filter sizing is an issue that applies to all new and existing homes that use ducted HVAC systems.

Website with consumer and contractor information about building codes and regulations for solar water heating systems.

Webpage containing California Energy Commission's HVAC design information, including mandatory and prescriptive HVAC requirements for residential and nonresidential buildings following the California Energy Commission's Building Energy Efficiency Standards.

AHRI-hosted directory of residential products meeting CEE's highest tier

Report describing ventilation system design, including a central fan integrated supply (CFIS) system, made up of a 6-inch outdoor air intake duct connected to the return side of the air handler with a fan cycling control to make sure the fan runs a programmed minimum amount of time.

Part 2 of an article discussing how to maximize two-pipe steam systems for resident space heating.

Report describing strategies to improve the aging steam heating systems in New York City to improve energy efficiency, reduce oil and gas usage, and cut maintenance costs.

Specification defining performance and reporting requirements to meet the voluntary “Cold Climate Air Source Heat Pump Specification” (ccASHP Specification) for air source heat pumps suited to heat efficiently in cold climates (IECC cz 4 and higher).

Webpage outlining how to optimize the installations and performance of mini-split heat pump systems. As well, it discusses a set of design considerations for multi-level homes, low load homes, and heat distribution to rooms without a heat source.

Report describing combined space- and water-heating (combi) systems using a high-efficiency direct-vent burner.

Report on heating and cooling air-distribution ducts that are insulated, installed close to the ceiling in a vented attic and covered with attic insulation to minimize energy loss.

Technical report detailing a study in which actual cooling loads are compared to modeled cooling loads.

Webpage with instructions for heat pump installers to choose the most suitable type of heat pump system, according to a project’s specific requirements.

Document for contractors detailing how to prioritize, control, and configure heat pumps in a residence that uses two heating systems.

Document for customers describing the benefits of two-system controls for homes, including information answering how, when, why, and how two-system controls with multiple heating sources are employed.