Library

Technical report on a field validation study that utilizes low-cost indoor air quality sensors to assess a smart ventilation system's effectiveness in maintaining acceptable indoor humidity in low-load homes in humid environments, revealing that while the smart ventilation algorithm demonstrated...

Research study outlining savings from reducing air infiltration, with and without the addition of mechanical ventilation, using two identical laboratory homes designed to model existing Florida building stock.

Report about development of effective strategies to reduce the overall building energy use in line with Building America goals in this modestly priced market rate project.

Report presenting a cold climate project examining and alternative approach to ground source heat pump ground loop design.

Report detailing the monitored and modeled performance of a solar home outside of Washington DC.

Report describing the various heat pump retrofit options for multifamily buildings in the U.S., segmented by building typology and heating system, to support better environmental, economic, and health outcomes.

Factsheet profiling a simple modification that can be made to window air-conditioners to improve their energy efficiency.

Website for consumers describing heat pump water heater technology and linking to retailers and installers.

Report providing the results of an analysis of humidity control and variable refrigerant flow (VRF) system efficiency in three new multifamily buildings in New York, NY.

Report providing information about energy-efficient heating, ventilation, and cooling (HVAC) equipment options to help homeowners cut their energy use, reduce their carbon footprint, and increase their homes comfort, health, and safety.

Report summarizing the status of a central hydronic heating system project in multifamily housing at the conclusion of the 20112012 heating season.

Report evaluating the relative effectiveness of various control and distribution strategies to improve hydronic space heating performance in existing low-rise multifamily buildings

The study described in this white paper is based on building energy modeling with an important focus on the indoor humidity impacts of ventilation.

Report summarizing approaches to addressing duct leakage in hot humid climates.

Report presenting improved air conditioner (AC) and heat pump (HP) modeling methods in the context of whole-building simulation tools.

Presentation on Improving Air-Conditioner and Heat Pump Modeling.

Report examining the impacts that common installation practices and age- induced equipment degradation may have on the installed performance of natural gas furnaces, as measured by steady-state efficiency and AFUE.

Fact sheet describing the newly developed Ventilation-Integrated Comfort System (VICS) that reduces space requirements and eliminates costly ductwork for separate heating, cooling, and ventilation systems, all while enhancing performance, addressing the demand for energy-efficient homes, and...

Report about promoting energy efficiency for Hilton Head Island.

Report providing information about laboratory testing of four residential window air conditioners.

Report documenting the measured performance of six residential ENERGY STAR vapor compression dehumidifiers.

Report on the long-term performance of mini-split heat pumps.

Report presenting long-term evaluation results from a hot-dry climate project that examines thermal and HVAC performance in a highly efficient home.

Document presenting a cost effective method that was used by four builders in the Gainesville, FL area to construct interior ducts in over a dozen site built homes.

Report focusing on managing the driving forces that move air and water vapor across the building envelope.

Document providing information on the impact of various defects and the potential energy savings that can result from proper maintenance, and describing a two-step process for diagnosing and correcting faults. This document is targeted towards home performance contractors who are relatively...

Document covering two fundamental retrofit strategies for air sealing around air handling systems that are located within the living space in an enclosed closet.

Report describing the installation and operation of forced-air heating and domestic hot water combi systems in residential homes.

Report providing step-by-step instructions for heating contractors and hydronic designers for selecting the proper control settings to maximize system performance and improve response time when using a thermostat setback.

Report about evaporative condensers, to provide information on a cost-effective solution for energy and demand savings in homes with cooling loads.

Document covering installation of high efficiency gas furnaces, including when to install a high efficiency gas furnace as a retrofit measure, how to identify and address risks, and steps to follow for the selection and installation process.

Report providing guidance on how to implement a compact duct system inside a plenum truss bulkhead of a one-story, slab-on-grade home.

Report describing the use of passive vents as a source of outdoor air in multifamily buildings.

Document covering the technical aspects of buried and insulated ducts (BEDs), as well as the advantages, disadvantages, and risks of BEDs compared to alternative strategies.

Report describing the sealing and insulating of HVAC duct systems in existing homes.

This document addresses adding—or improving—mechanical ventilation systems to existing homes. The purpose of ventilation is to remove contaminants from homes either directly or by dilution. This report discusses where, when, and how much ventilation is appropriate in a home, including some...

Document intending to put some context and structure around the process of balancing and tuning one-pipe steam systems to help practitioners begin to garner the potential in energy savings that this measure presents.

Document illustrating guidelines for efficient installation of interior duct systems in new housing.

Guide describing proper application, design, and installation of mechanical ventilation cooling systems for homes located in hot-dry and cold-dry climates, as well as a means of understanding the benefits, costs, and tradeoffs of these systems.

Report describing the most cost-effective ventilation and indoor air quality solutions for multifamily homes that meet ASHRAE 62.2-2016.

Research study analyzing measured energy savings from a moderate retrofit by comparing post-retrofit performance with measured pre-retrofit monitored data.

Research study outlining results of monitoring a low temperature heat pump.

Document on the development of two simple in-home efficiency test methods that can be used by technicians, researchers, or interested homeowners to verify the correct operation and energy efficiency of a homes air conditioning and heating equipment.

Document about development of recommendations to help residential HVAC designers select optimal supply inlet size and system operating conditions to maintain good thermal comfort in low heating and cooling load homes.

Research study using modeling to determine optimal combination(s) of components/pumps, high efficiency heat sources, plumbing configurations and controls that result in the highest overall efficiency for a hydronic system.

Report providing information to researchers, utility program managers, and building owners interested in controlling heating energy waste and improving resident comfort.

Information sheet providing guidance about the placement of ventilation approaches.

Document with important building science considerations, designed for members of the residential construction and remodeling industries, as well as owners and managers who work in affordable housing.

Information sheet designed for the residential construction and remodeling industries, as well as owners and managers working in affordable housing. This sheet presents building guidance for both new construction and rehabilitation, as well as practices that can be used by property maintenance...