Library

Report describing an air distribution system composed of a series of uniformly-sized ducts that terminate in rooms throughout the home and return to a central manifold, similar in fashion to a “home-run” cross-linked polyethylene plumbing system.

Standards book discussing the minimum standards of total system balance of HVAC systems.

Standard providing a universally accepted definition for quality installation for residential and commercial heating, ventilating, and air conditioning applications.

Document detailing the requirements, roles, and obligations for participants in an organized effort, ensuring that HVAC installations comply with the ANSI/ACCA 5 QI – 2010 (HVAC Quality Installation Specification) QI Standard.

Report describing a field investigation of failure rates of whole-house mechanical ventilation systems installed in Florida homes.

Code establishing the rules of safety relating only to pressure integrity for the design, fabrication, and inspection of boilers and pressure vessels during construction which was published in the year 2017 and is available to order at the referenced link.

Report describing combined space- and water-heating (combi) systems using a high-efficiency direct-vent burner.

Report describing how space-conditioning systems are operating in the field and if these systems are meeting required standards.

Bulletin describing the components of ECM motors and comparing their efficiency with PSC motors.

Technical report presenting the results of an evaluation of homes using high-efficiency mini-split heat pumps to supplement the primary heating and cooling systems.

Article describing benefits of ECM motors and how they can be installed as retrofit motors in HVAC equipment.

Fact Sheet describing the need for supplemental dehumidification, dehumidifier configuration options, and design considerations.

Report describing the installation and operation of forced-air heating and domestic hot water combi systems in residential homes.

Report describing the use of passive vents as a source of outdoor air in multifamily buildings.

Report describing the most cost-effective ventilation and indoor air quality solutions for multifamily homes that meet ASHRAE 62.2-2016.

Web resource that lays out the pre-work considerations, methods and finishes for installing mechanical insulation.

Standard establishing a test procedure for evaluating the performance of air-cleaning devices as a function of particle size. This is the current version of the standard, which was published in the year 2017, and is available for preview and purchase at the reference link. The ASHRAE bookstore also...

Guide describing flood protection measures for utility systems, including mechanical, electrical, plumbing, and fuel.

This project analyzed combined condensing water heaters or boilers and hydronic air coils to provide high efficiency domestic hot water (DHW) and forced air space heating. Called "combi" systems, they provided similar space and water heating performance less expensively than installing two...

This research paper outlines residential HVAC advanced controls and sensors. It includes a technology review, applications, maintenance and commissioning, occupant behavior and a summary of the state-of-the-art technologies for advanced controls for residential HVAC.

Standard that defines the roles of and minimum requirements for mechanical and natural ventilation systems and the building envelope intended to provide acceptable indoor air quality in low-rise residential buildings. This version of the standard was published in the year 2016, and is available for...

Standard 680 establishes definitions, classifications, test requirements, data requirements, ratings, operating requirements, marking and nameplate data and conformance conditions for residential air filter equipment.

This Standard provides a consistent, uniform methodology for evaluating the airtightness of building envelopes and heating and cooling air ducts and the air flows of mechanical ventilation systems.