Library

Web article describing common issues that can cause refrigerant system flare joints to leak.

Fact sheet describing a report providing best practices for reducing damages from floods to manufactured homes.

2012 edition of code establishing a baseline for the design and installation of fuel gas systems and gas fired appliances through performance requirements.

2012 edition of code establishing minimum regulations for mechanical systems, including heating, cooling, ventilation, exhaust, ducts, fireplaces, combustion and hydronic systems, using prescriptive and performance-related provisions.

A supplement to the 2012 Florida Building Code on energy efficiency and conservation.

2015 edition of code for commercial buildings that brings together all structural, plumbing, mechanical, fuel gas, energy and electrical provisions for all buildings except detached one- and two-family residences and townhouses up to three stories.

2015 edition of code establishing minimum regulations for mechanical systems, including heating, cooling, ventilation, exhaust, ducts, fireplaces, combustion and hydronic systems, using prescriptive and performance-related provisions.

Fact sheet providing an overview of FEMA P-348, Protecting Building Utility Systems From Flood Damage.

Document describing portions of the flood provisions from the 2018 editions of the IBC, IRC, IEBC, IMC, IPC, IFGC, IFC, ISPSC, IPSDC, and ICC Performance Code.

2018 edition of code establishing minimum regulations for mechanical systems, including heating, cooling, ventilation, exhaust, ducts, fireplaces, combustion and hydronic systems, using prescriptive and performance-related provisions.

A presentation on the 2020 State Mechanical Code for easier understanding.

Guidebook covering basic principles and data used in the HVAC&R industry. This is the 2021 edition of the handbook, which can be purchased physically or digitally at the reference link in versions using either I-P units of measurement or SI units of measurement.

Catalog describing FEMA preparedness seminars from 2021 including preparedness and natural hazards topics.

Performance rating standards for unitary air-conditioners and unitary air-source heat pumps, including definitions, classifications, testing, rating, and operating requirements, as well as minimum data requirements for published ratings and markings.

Guidebook covering basic principles and data used in the HVAC&R industry. This is the 2023 edition of the handbook, which can be purchased physically or digitally at the reference link in versions using either I-P units of measurement or SI units of measurement.

Article describing products that can enhance the efficiency and safety of clothes dryer vents.

Report providing builders in the hot-dry and mixed-dry climates with guidance for building homes that have whole-house energy savings of 40% over the Building America benchmark with no added overall costs for consumers.

A guidebook helping builders in hot-humid climates design and construct homes for energy efficiency, durability, health, safety, and comfort.

Article describing methods for venting a vented attic and a roof assembly over an unvented attic.

Research study estimating potential energy savings relative to conventional ducted air distribution, and identifying equipment requirements, costs, and barriers.

Report describing a project whose goal was to determine the prevalence of residential comfort system faults with a focus on air conditioners and heat pumps, and on key faults that can occur during installation: (1) incorrect refrigerant charge level (undercharge or overcharge); (2) indoor coil...

Report describing the results of a field study of five different ventilation system types in 29 homes in the Pacific Northwest.

Case study providing homeowners guidance on installing window air conditioners.

Paper discussing innovative strategies for improving ventilation systems in high-rise apartment buildings, focusing on compartmentalization and controlling stack effect pressures to enhance indoor air quality and energy efficiency published in the Proceedings of the Eighth Conference on Building...

Report describing an air distribution system composed of a series of uniformly-sized ducts that terminate in rooms throughout the home and return to a central manifold, similar in fashion to a “home-run” cross-linked polyethylene plumbing system.

Guidance document from the UN environment programme on climate-resilient buildings and communities practices, including guidance on heat waves, drought, hurricanes, and flooding.

Report describing how changing the air exchange rate of a home (the sum of the infiltration and mechanical ventilation airflow rates) affects the annual thermal conditioning energy.

Standards book discussing the minimum standards of total system balance of HVAC systems.

Energy Star web page providing guidance on attic ventilation.

Document describing three methods for elevating a home out of the flood zone.

Website containing commercial information related to air conditioning and heating.

Website homepage for the Air Conditioning Contractors of America (ACCA).

Webpage of ACCA’s Quality Standards outlining precisely the procedures that contractors should follow when designing, installing, maintaining, repairing, and verifying indoor environment systems.

Webpage listing ACCA Manual J and D calculation software that is approved by ACCA.

The manual covers residential zoning issues - multiple, single-zone, and central multi-zone systems - and includes advice on working with homeowners to adapt the heating or cooling system design to meet modern home design features.

Technical manual from ACCA outlining correct methods for zoning of residential HVAC systems.

This Standard establishes the minimum requirements to evaluate a residence with regards to energy efficiency, water conservation, occupant comfort, and indoor air quality.

Standard providing nationally recognized, manufacturer-endorsed set of inspection tasks for HVAC maintenance.

Standard providing a universally accepted definition for quality installation for residential and commercial heating, ventilating, and air conditioning applications.

Document detailing the requirements, roles, and obligations for participants in an organized effort, ensuring that HVAC installations comply with the ANSI/ACCA 5 QI – 2010 (HVAC Quality Installation Specification) QI Standard.

Fact sheet describing best strategies to bring ductwork on single-story homes with a slab-on-grade foundation in hot, dry climates into the conditioned envelope of the home intending to highlight the pros and cons of multiple ductwork integration strategies, including traditional duct systems in...

Report providing guidance on wet floodproofing crawlspaces, unfinished basements, and garages.

Report providing guidance to homeowners and business owners on protecting crawlspaces from flood damage.

Standard for use and reference by designers, architects, engineers, contractors, installers and users for evaluating, selecting, specifying and properly installing flexible duct in heating and air conditioning systems.

The research report outlines a practical and cost-effective strategy utilizing central HVAC systems to optimize humidity control and ventilation in energy-efficient homes located in hot-humid climates, demonstrating significant improvements without requiring complex equipment upgrades.

Document providing guideance and considerations for duct design in an energy efficient house.

Website providing research, efficiency and safety standards development, and advocacy to the home appliance industry to bring efficient, high-performing home appliances to consumers.

Website reporting efficiencies for dehumidifiers, room air conditioners, and room air cleaners that are tested by independent laboratories and reported by the Association of Home Appliance Manufacturers.

Report describing the experience gained from AIA’s Disaster Assistance Program with first-hand accounts of disaster response and recovery, case studies and other best practices, including approaches to designing buildings to be more adaptable to uncertainty.

Report describing two retrofit duct sealing techniques - manually-applied sealants and injecting a spray sealant, that were implemented in several low-rise multi-unit buildings in North Carolina.