Library

2009 edition of code establishing a baseline for the design and installation of fuel gas systems and gas fired appliances through performance requirements.

2012 edition of code establishing minimum regulations for mechanical systems, including heating, cooling, ventilation, exhaust, ducts, fireplaces, combustion and hydronic systems, using prescriptive and performance-related provisions.

A presentation on the 2020 State Mechanical Code for easier understanding.

Article describing vapor retarder requirements in the International Residential Code and International Building Code 2021.

Performance rating standards for unitary air-conditioners and unitary air-source heat pumps, including definitions, classifications, testing, rating, and operating requirements, as well as minimum data requirements for published ratings and markings.

Guidebook covering basic principles and data used in the HVAC&R industry. This is the 2023 edition of the handbook, which can be purchased physically or digitally at the reference link in versions using either I-P units of measurement or SI units of measurement.

Report providing builders in marine climates with guidance for building homes that have whole-house energy savings of 40% over the Building America benchmark with no added overall costs for consumers.

Report describing measures that builders in mixed-humid climates can use to build homes that have whole-house energy savings of 40% over the Building America benchmark with no added overall costs for consumers.

Web page describing essential guidelines and recommendations for optimal installation of ductless heat pumps in cold climates, ensuring maximum heating performance and long-term satisfaction for homeowners, supported by research-backed insights and detailed resources.

Report discussing opportunities and trends in the U.S. home performance contracting industry, along with market drivers such as consumer demand; federal, state, and local programs; and utility and non-governmental programs.

Article describing methods for venting a vented attic and a roof assembly over an unvented attic.

Report describing a project whose goal was to determine the prevalence of residential comfort system faults with a focus on air conditioners and heat pumps, and on key faults that can occur during installation: (1) incorrect refrigerant charge level (undercharge or overcharge); (2) indoor coil...

Website containing commercial information related to air conditioning and heating.

Website homepage for the Air Conditioning Contractors of America (ACCA).

Standard providing a universally accepted definition for quality installation for residential and commercial heating, ventilating, and air conditioning applications.

Document detailing the requirements, roles, and obligations for participants in an organized effort, ensuring that HVAC installations comply with the ANSI/ACCA 5 QI – 2010 (HVAC Quality Installation Specification) QI Standard.

Report examining the structural properties and applications of an innovative studless building system, detailing its testing regime and providing an engineering guide for architects and engineers.

Fact sheet poster describing how to add exterior, continuous, rigid insulation to the exterior walls when replacing siding on an existing home.

Report on the design and evaluation of extended plate and beam.

Case study on the design and evaluation of extended plate and beam, located in Mount Joy Pennsylvania.

Specifications for water heating systems designed to advance higher performing electric and gas heat pump water heaters.

This is a federal tax credit for complying air source heat pumpe. Units located in the "North" must meet ENERGY STAR's cold climate heat pump criteria.

Document providing step-by-step guidance to sizing air-source heat pumps for a cold climate.

Webpage describing the functionality and benefits of switching to Air Source Heat Pumps, as well as linking to sets of products, rebates, most efficient ASHPs, and providing consumer aid for purchasing an ASHP.

Article about different types of weather resistant barrier.

Technical report describing how the FSEC Energy Research Center explores low-cost space-conditioning upgrades for existing homes by integrating centrally located, high-efficiency ductless mini split heat pumps with older but functional central space conditioning systems, aiming to achieve energy...

Report analyzing design heating load sizing methods for superinsulated homes in cold climates and comparing them to the actual energy usage to determine if the building load calculation methodology should be changed for calculating the design heating load of these homes.

Standard providing a methodology for evaluating the installation quality of unitary HVAC systems.

Technical fact sheet describing ways to construct asphalt shingle roofs to be more resistant to high winds and hurricanes; also published in FEMA P-499 “Home Builder’s Guide to Coastal Construction: Technical Fact Sheet Series.”

DOE report characterizing market and technical barriers impeding broader utilization of fault detection technology for residential HVAC energy efficiency applications.

Document providing guidance to U.S. home builders who want to accept the challenge.

Guide describing measures that builders in the cold and very cold climates can take to build homes that have whole-house energy savings of 40% over the Building America benchmark with no added overall costs for consumers.

Web based tool providing decision-making guidance for selecting wall assembly components.

Report summarizing the guidelines for developing and reporting analytical results in a consistent and meaningful manner for all home energy uses.

Document illustrating some analysis concepts that are proven to be effective and reliable in analyzing the transient energy usage of advanced energy systems as well as of entire houses.

Article describing the control layers (air, thermal, and vapor barriers) needed to build homes successfully in very cold locations.

Website providing CAD files and drawings of advanced framing details.

Document with the Quality Control Checklist developed as both a guide to assist in the transition to high performance home building, and as a simplified tool to be used as part of any builder's on-site quality control procedures.

The EPA Burn Wise program promotes the importance of burning the right wood in the right way from the right sources with mission to protect human health and the environment.

Report describing a deep energy retrofit project for a two-family wood framed home located in Belmont, Massachusetts.

Book describing Carpentry and Construction, Construction Materials, Hand Tools, Power Tools, Construction Equipment, Jobsite Safety, and Working Conditions, Building Design and Print reading, Inspections Survey Instruments and Operations, Foundation and Outdoor Slab Construction, Floor, Wall, and...

Report summarizing the key opportunities, gaps, and barriers identified by the national laboratory white papers discussing long-term 50% energy reduction goals.

Information sheet discussing how OSB will define the future of the structural sheathing market. OSB will define the future of the structural sheathing market. - See more at: http://bct.eco.umass.edu/publications/by-title/choosing-between-oriented-strandboard-and-plywood/#sthash.RilEtDpl.dpuf

Part 2 of an article discussing how to maximize two-pipe steam systems for resident space heating.

A list of EPA-certified wood-burning appliances for home heating for a range of budgets.

Article describing correct ways to attach rigid insulation to the exterior of commercial and residential buildings.

Report describing combined space- and water-heating (combi) systems using a high-efficiency direct-vent burner.

Report on a simplified test procedure for combustion safety that is easier to implement and should produce fewer false positives than the previous procedure.

Report describing how space-conditioning systems are operating in the field and if these systems are meeting required standards.

Research study comparing various retrofit models in Wisconsin to evaluate performance in terms of savings per home and program cost per home to assess the relative cost effectiveness of each program design.