Library

Guide providing minimum design and construction requirements for storm shelters that provide a safe refuge from storms that produce high winds, hurricanes, and tornadoes.

Report summarizing the requirements to strenghthen new homes against property damage caused by high wind occurrences per the IBHS Fortified Homes High Wind Standard for New Homes.

Report summarizing the wind-resistant provisions of the 2015 edition of the International Building Code.

Florida building code including all the amendments and additions by Florida for the wind-borne debris regions and the high-velocity hurricane zone.

A colored map showing seismic zones across the United States, ranging from lowest to highest seismic hazards.

Report assessing and scoring code enforcement and administration and contractor licensing in the 18 states most vulnerable to catastrophic hurricanes along the Atlantic Coast and the Gulf of Mexico.

Building code for the state of California providing the building rules and regulations as well as disaster resistance tools.

Report summarizing the requirements for strenghtening and protecting the roof, openings in the house, and creating a continuous load path to strengthen walls and foundation per the IBHS Fortified Homes Hurricane Standard for New Homes.

Residential building code for the State of Florida.

Guide describing the requirements by FORTIFIED Home™ for improving the home's resistance in severe thunderstorms, straight-line wind events, and high winds at the outer edges of tornadoes.

Guide describing the requirements by FORTIFIED Home™ for improving the home's resistance in severe thunderstorms, straight-line wind events, and high winds at the outer edges of tornadoes.

Report assessing building codes for the 18 Atlantic and Gulf coast states which are most prone to hurricanes, as of 2018.

Article describing thermal bridging, construction practices that encourage thermal bridging, and solutions.

Guidance document from the UN environment programme on climate-resilient buildings and communities practices, including guidance on heat waves, drought, hurricanes, and flooding.

Article describing methods for thermally isolating a garage in a Passive House-certified multifamily building.

Report describing advanced framing techniques, including discussion of cost and energy savings.

Report describing approaches to using less wood in home building that minimize waste.

Fact sheet describing advanced framing techniques that reduce the amount of lumber used in constructing wood-framed houses while providing more space for wall insulation.

Fact sheet describing advanced wall framing.

Report describing the experience gained from AIA’s Disaster Assistance Program with first-hand accounts of disaster response and recovery, case studies and other best practices, including approaches to designing buildings to be more adaptable to uncertainty.

Website article interviewing the inventor of the Larsen truss, a history of its use, and a discussion of its advantages and disadvantages.

A publication highlighting recommendations that contribute to improved overall performance in the structural shell and focus on good connection details to tie together exterior walls, roofs and floors.

Wall bracing calculator simplifying the design of residential structures that comply with 2009, 2012, 2015, 2018 or 2021 International Residential Code (IRC) wall bracing requirements.

Web-based mapping tool offering a fast, reliable way to look up key design parameters specified in Standard ASCE 7-10, 7-16, or 7-22 for a specific address or location which is free to use and can look up data for eight different environmental hazard types: wind, tornado, seismic, ice, rain, flood...

A report that evaluates the force it takes to crack stucco of various thicknesses.

A book about structurally insulated panels.

Report investigating implementation of advanced framing in both production and prototype built homes built in a variety of climate regions across the USA.

Presentation about advanced framing techniques.

Document containing recommendations on how to brace roofs and gable end walls based on lessons learned from analyzing the destruction from hurricane Andrew.

Website providing CAD files and drawings of advanced framing details.

Website providing information about building plans for the ENERGY STAR thermal bypass checklist.

Information sheet containing images and descriptions of cantilevers.

Fact sheet describing changes made to the 2010 Florida Building Code with regards to wind design loads and requirements.

Document with information from a workshop addressing framing materials for residential buildings in California. A copy of the document can be requested at the resource link, and an online copy of the document can be found by searching for it on the California Energy Commission's Library Online...

Case study characterizing the framing factors for the exterior walls, ceilings, and floors of 180 wood-framed low-rise residential buildings across the United States.

Fact sheet describing the characteristics that make for a successful coastal residential building, including design and construction recommendations; also published in FEMA P-499 “Home Builder’s Guide to Coastal Construction: Technical Fact Sheet Series.”

Report describing retrofitting options and methodology for architects, developers, and property owners to use when making decisions about retrofits for common building types in NY.

Report providing tools and resources to help community planners to improve coastal resilience.

Volume II of a two-volume report providing a comprehensive approach to design, construction, and renovation of homes located in coastal environments.

Article summarizing the IBHS stance on building practices that can mitigate the impact of high winds and storm surge on structures.

Document containing a 3D drawing (CAD) of advanced framing details.

Article describing construction best practices to help reduce the wind-induced pressure loads on a low-rise building during a hurricane.

FEMA risk management series guide on hospital safety and resilience to natural disasters.

Report providing information on ways to incentivize funding of hazard mitigation programs.

Website helping communities address coastal issues with data, tools, and training resources.

A guide on the use of rain barrels for greater water efficiency and use in gardens and lawns.

A website by the U.S. DOE highlighting the potential energy savings from upgrading energy inefficient windows with low-emissivity.

Article describing the difference between swales and hugels (berms used to create soil from woody debris).

Designer checklist covering hazards involving ground and surface water, rain and water vapor, HVAC and plumbing, sunlight, insects, decay, and natural hazards, and builder checklist covering all disaster resistance, sorted by building component.

A book describing how to complete an earthquake retrofit plan for wood-frame residential buildings.