Library

Fact sheet describing a report providing best practices for reducing damages from floods to manufactured homes.

Fact sheet providing an overview of the FEMA document Wind Retrofit Guide for Residential Buildings.

Guide providing engineering seismic design and building practices based on post-earthquake research.

Report providing builders in marine climates with guidance for building homes that have whole-house energy savings of 40% over the Building America benchmark with no added overall costs for consumers.

Report describing measures that builders in mixed-humid climates can use to build homes that have whole-house energy savings of 40% over the Building America benchmark with no added overall costs for consumers.

Report discussing opportunities and trends in the U.S. home performance contracting industry, along with market drivers such as consumer demand; federal, state, and local programs; and utility and non-governmental programs.

Report describing a project whose goal was to determine the prevalence of residential comfort system faults with a focus on air conditioners and heat pumps, and on key faults that can occur during installation: (1) incorrect refrigerant charge level (undercharge or overcharge); (2) indoor coil...

Fact sheet poster describing how to add exterior, continuous, rigid insulation to the exterior walls when replacing siding on an existing home.

Article describing how an airtight home shell helps achieve a tight envelope that is energy efficient and cost effective.

Standard providing a methodology for evaluating the installation quality of unitary HVAC systems.

DOE report characterizing market and technical barriers impeding broader utilization of fault detection technology for residential HVAC energy efficiency applications.

Report describing approaches to insulating basements in homes built to meet Energy Star levels of performance of heat loss reduction.

Article from California Earthquake Authority on the benefits of retrofitting homes to withstand earthquake forces, with a focus on foundations, walls, and chimneys.

Document focusing on the design and wall components that contribute to a pressure equalized rain screen wall, including the frequency of the weep holes and other brick masonry rain screen wall requirements.

Information sheet about insulating slabs.

Document providing guidance to U.S. home builders who want to accept the challenge.

Guide describing measures that builders in the cold and very cold climates can take to build homes that have whole-house energy savings of 40% over the Building America benchmark with no added overall costs for consumers.

Web based tool providing decision-making guidance for selecting wall assembly components.

Report summarizing the guidelines for developing and reporting analytical results in a consistent and meaningful manner for all home energy uses.

Document illustrating some analysis concepts that are proven to be effective and reliable in analyzing the transient energy usage of advanced energy systems as well as of entire houses.

Article describing the control layers (air, thermal, and vapor barriers) needed to build homes successfully in very cold locations.

Website providing CAD files and drawings of advanced framing details.

Document with the Quality Control Checklist developed as both a guide to assist in the transition to high performance home building, and as a simplified tool to be used as part of any builder's on-site quality control procedures.

Report about the fundamental concepts that must be understood at the planning or initial nspection of existing homes regarding surface and ground water management.

Report describing a deep energy retrofit project for a two-family wood framed home located in Belmont, Massachusetts.

Article describing correct ways to eliminate water damage by incorporating a sacrificial layer to foundation walls and footings.

Book describing Carpentry and Construction, Construction Materials, Hand Tools, Power Tools, Construction Equipment, Jobsite Safety, and Working Conditions, Building Design and Print reading, Inspections Survey Instruments and Operations, Foundation and Outdoor Slab Construction, Floor, Wall, and...

Report summarizing the key opportunities, gaps, and barriers identified by the national laboratory white papers discussing long-term 50% energy reduction goals.

Installation manual for installing metal panel siding.

Report aimed to quantify the impact of closed crawlspaces in new homes, and investigate modeling software to ensure accuracy of energy consumption predictions in these homes.

Guide about designing and installing closed crawlspaces in the Southeast.

Volume 1 of a two-volume report providing a comprehensive approach to planning, siting, and risk management for homes constructed in coastal environments.

Website discussing building foundation problems caused by settling soil in Colorado.

An article illustrating common errors found in fiber cement siding installations. Many of these errors and poor flashing examples apply to siding materials beyond fiber cement siding.

Research study comparing various retrofit models in Wisconsin to evaluate performance in terms of savings per home and program cost per home to assess the relative cost effectiveness of each program design.

Two hourly energy simulation software, BEopt and Energy Gauge USA, were compared to ensure accuracy and evaluate agreement on the impact of various energy efficiency improvements.

Information guide describing issues with concrete floors, in multiple climate zones.

Document discussing moisture considerations and testing techniques for concrete floors.

Report covering insulating crawlspaces.

Article describing the process of constructing concrete walls

Article about how mortar droppings during the installation of a brick veneer can clog the weep holes in the wall assembly causing moisture damage. The article also illustrates products that can be installed in the ventilated cavity to mitigate this problem.

Website providing building science based guidance and training for residential construction.

Guidance document on deep energy retrofits.

Part of a larger LBNL report (Deep Energy Retrofit Guidance for the Building America Solutions Center), the Design and Construction Process chapter provides detailed guidance for each process phase: pre-planning, planning, construction, test-out and post-occupancy.

Part of a larger LBNL report (Deep Energy Retrofit Guidance for the Building America Solutions Center), the Lessons Learned chapter focuses on successful deep energy retrofit projects throughout the U.S.

Report describing the progress toward and issues related to developing a usable, standardized, empirical data-based software accuracy test suite.

Report providing guidance on designing buildings to be flood resistant.

Report covering the rainwater performance of building assemblies.

Website for finding policies and incentives by state for renewables and efficiency.

Case study describing foundation wall moisture studies at a research facility in Minnesota run by Building America team NorthernSTAR.