Library

Guide providing minimum design and construction requirements for storm shelters that provide a safe refuge from storms that produce high winds, hurricanes, and tornadoes.

Report summarizing the requirements to strenghthen new homes against property damage caused by high wind occurrences per the IBHS Fortified Homes High Wind Standard for New Homes.

Report summarizing the wind-resistant provisions of the 2015 edition of the International Building Code.

Report summarizing the requirements for strenghtening and protecting the roof, openings in the house, and creating a continuous load path to strengthen walls and foundation per the IBHS Fortified Homes Hurricane Standard for New Homes.

Guide describing the requirements by FORTIFIED Home™ for improving the home's resistance in severe thunderstorms, straight-line wind events, and high winds at the outer edges of tornadoes.

Article describing how to detail head flashing above a window.

Report describing the experience gained from AIA’s Disaster Assistance Program with first-hand accounts of disaster response and recovery, case studies and other best practices, including approaches to designing buildings to be more adaptable to uncertainty.

A report that evaluates the force it takes to crack stucco of various thicknesses.

Information sheet with details on pan flashing for exterior walls.

Report providing water management details for roof assemblies.

An article illustrating common errors found in fiber cement siding installations. Many of these errors and poor flashing examples apply to siding materials beyond fiber cement siding.

FEMA risk management series guide on hospital safety and resilience to natural disasters.

Report providing information on ways to incentivize funding of hazard mitigation programs.

Fact sheet describing weatherstripping materials, types, expected life expectancy, installation requirements, and pros and cons.

A fact sheet on how to prepare for a natural disaster by storing food and water through an emergency food supply.

Report summarizing the requirements for strenghtening and protecting the roof, openings in the house, and creating a continuous load path to strengthen walls and foundation per the IBHS Fortified Homes Hurricane Standard for Existing Homes.

Checklist providing good and bad methods of fortifying the roof, especially in high wind situations.

Checklist providing good and bad methods of fortifying the roof, especially in hurricanes.

Checklist providing information about the specific requirements of FORTIFIED Roof™ design and construction standard for re-roofing specific for high wind resistance.

Checklist providing information about the specific requirements of FORTIFIED Roof™ design and construction standard for re-roofing specific for high wind and hail resistance.

Checklist providing information about the specific requirements of FORTIFIED Roof™ design and construction standard for re-roofing specific for hurricane resistance.

Website providing technical documents of checklists, calculators, bulletin, modular home toolkit, standard details, and corrosion resistance requirements – map set; describing the requirements of the IBHS Fortified Home program to improve the disaster resistance of new and existing homes.

Guide describing how and where to install flashings in order to weatherproof a roof.

Website article touring areas hit hardest by tornadoes to see how they are building differently to protect against the next big twister.

A article about the best practice method of installing fiber cement siding, to install flashing at the butt joints of the siding boards, rather than face caulking the butt joints afterwards.

NOAA webpage providing images and short descriptions of different types of hurricane shutters.

An impact test report from projectile missile tests against brick veneer, verifying that brick veneers perform well to resisting hurricane force wind driven debris.

Article describing the second step of a three-step process for the installation a tubular skylight, using peel-and-stick flashing tape instead of roof cement, and integrating the roof underlayment with the flashing.

Article describing how to counterflash a chimney by tucking the upper pieces of counterflashing into the chimney mortar joints and overlapping them over the various pieces of base flashing, which are nailed to the roof deck.

Report with guidance for installing windows with foam sheathing on wood-frame walls.

Article showing steps for kick out flashing at roof-wall intersection.

Article describing a technique for installing a skylight and avoiding potential water leaks with the use of a peel-and-stick (or self-adhesive) membrane under the flashing.

Article describing the flashing of roofs and what to look for, targeted at home inspectors.

Siding installation guide for Ply Gem Siding Group products.

Measure Guideline research report providing simple, long term, and durable solutions when using tapes and flashing membranes in conjunction with the exterior face of rigid polymeric foam sheathing to create the drainage plane of a wall system.

Report providing a resource that communities can use to identify and evaluate a range of potential mitigation actions for reducing risk to natural hazards and disasters.

Report providing extensive guidance on controlling moisture in building envelopes through proper selection and installation on air, water, thermal, and vapor barriers.

Website containing USGS-related publications related to natural hazards.

A fact sheet educating the public on the potential hazards and safe use of portable generators.

Report covering wind loading on roofing assemblies.

Website providing guidance on how to reduce the risk of damage to a home from hail.

Database describing FEMA preparedness webinars including natural hazard preparedness.

Fact sheet describing how to prepare for a natural disaster and assemble a disaster supply kit.

A fact sheet providing tips on how to assemble a kit of food, water and other disaster supplies in the event of an emergency.

Report describing the testing of various siding materials for their ability to resist bullets from small firearms.

Fact sheet describing how to install bracing to retrofit roof dormers for increased wind resistance.

Fact sheet describing flashing of roof penetrations to make a home more resistant to high winds, hurricanes, and rainwater intrusion.

FEMA information on safe room funding to regional governments.

Report covering the planning, design, construction, and operation of residential and community safe rooms. Written for architects, engineers, building officials, local officials and emergency managers, and prospective safe room owners and operators.

Guide describing the installation of windows in walls that have foam plastic insulating; guide provides several methods for attaching, supporting, and flashing windows in walls with rigid foam sheathing. (Note: The link only goes to the table of contents for the guide, the full guide can be...