Library

Report examining the structural properties and applications of an innovative studless building system, detailing its testing regime and providing an engineering guide for architects and engineers.

Fact sheet poster describing how to add exterior, continuous, rigid insulation to the exterior walls when replacing siding on an existing home.

Report on the design and evaluation of extended plate and beam.

Case study on the design and evaluation of extended plate and beam, located in Mount Joy Pennsylvania.

Article describing correct ways to attach rigid insulation to the exterior of commercial and residential buildings.

Document presenting step-by-step process for installing rigid insulating sheathing over wood studs or house wrap.

Report on high-R wall design called extended plate and beam that uses foam sheathing insulation with wall framing.

The study described in this white paper is based on building energy modeling with an important focus on the indoor humidity impacts of ventilation.

Research study describing the impact resistance performance of advanced framed wall systems with insulating sheathing as the primary sheathing from wind blown debris.

Case study about how to properly tape insulating sheathing drainage planes.

Guide describing proper application, design, and installation of mechanical ventilation cooling systems for homes located in hot-dry and cold-dry climates, as well as a means of understanding the benefits, costs, and tradeoffs of these systems.

Report providing extensive guidance on controlling moisture in building envelopes through proper selection and installation on air, water, thermal, and vapor barriers.

This research paper outlines residential HVAC advanced controls and sensors. It includes a technology review, applications, maintenance and commissioning, occupant behavior and a summary of the state-of-the-art technologies for advanced controls for residential HVAC.

Conference paper describing testing of the performance of fasteners used to attach rigid foam insulation to the exterior of walls.

Article describing the evolution of the IRC to permit class 3 vapor retarders (latex paint) in walls coupled with exterior continuous insulation to allow drying and reduce condensation risk.

Case study about a structural sheathing product composed of enhanced EPS rigid foam with OSB adhered on one side.

Preliminary results of two monitored lab homes constructed to represent the thermal characteristics of typical existing Florida homes are presented.

This report describes how twenty homes were tested and monitored in the Zone 2 climate of Houston, Texas, U.S.A., to evaluate the humidity control performance and operating cost of six different integrated dehumidification and ventilation systems that could be applied by production homebuilders.