Library

Guide providing minimum design and construction requirements for storm shelters that provide a safe refuge from storms that produce high winds, hurricanes, and tornadoes.

Report summarizing the wind-resistant provisions of the 2015 edition of the International Building Code.

Federal statistics about national energy consumption in residential homes.

Federal statistics about national energy consumption in residential homes in 2020

Report providing builders in marine climates with guidance for building homes that have whole-house energy savings of 40% over the Building America benchmark with no added overall costs for consumers.

Report describing measures that builders in mixed-humid climates can use to build homes that have whole-house energy savings of 40% over the Building America benchmark with no added overall costs for consumers.

Report discussing opportunities and trends in the U.S. home performance contracting industry, along with market drivers such as consumer demand; federal, state, and local programs; and utility and non-governmental programs.

Report describing a project whose goal was to determine the prevalence of residential comfort system faults with a focus on air conditioners and heat pumps, and on key faults that can occur during installation: (1) incorrect refrigerant charge level (undercharge or overcharge); (2) indoor coil...

Website article comparing DC and AC batteries and explaining that DC batteries have black start ability to restart from solar power while providing AC batteries need grid power to restart if fully discharged.

Website article describing pros and cons of DC and AC batteries and explaining that AC batteries are less expensive than DC batteries.

Website article describing the advantages and disadvantages of AC and DC battery energy storage systems and inverters for solar power systems.

Report describing the experience gained from AIA’s Disaster Assistance Program with first-hand accounts of disaster response and recovery, case studies and other best practices, including approaches to designing buildings to be more adaptable to uncertainty.

Website describing electric vehicles, electric vehicle charging stations, and incentives for installing electric vehicle charging stations.

Report analyzing design heating load sizing methods for superinsulated homes in cold climates and comparing them to the actual energy usage to determine if the building load calculation methodology should be changed for calculating the design heating load of these homes.

Standard providing a methodology for evaluating the installation quality of unitary HVAC systems.

Report describing the business case of hosting a Level 2 electric vehicle (EV) charging station in New York, including analysis of real-world data on equipment use, costs, revenue, and assumptions derived from industry reports and original research.

A report that evaluates the force it takes to crack stucco of various thicknesses.

DOE report characterizing market and technical barriers impeding broader utilization of fault detection technology for residential HVAC energy efficiency applications.

Website providing comparison charts and reviews of battery energy storage systems for solar power systems.

Fact sheet providing information on building-scale and utility-scale battery storage for disaster resistance.

Article describing bidirectinoal charging and energy storage methods using electric vehicles.

Report describing detailed information on costs associated with the installation of electric vehicle chargers.

Document providing guidance to U.S. home builders who want to accept the challenge.

Guide describing measures that builders in the cold and very cold climates can take to build homes that have whole-house energy savings of 40% over the Building America benchmark with no added overall costs for consumers.

Report summarizing the guidelines for developing and reporting analytical results in a consistent and meaningful manner for all home energy uses.

Document illustrating some analysis concepts that are proven to be effective and reliable in analyzing the transient energy usage of advanced energy systems as well as of entire houses.

Website providing CAD files and drawings of advanced framing details.

Document with the Quality Control Checklist developed as both a guide to assist in the transition to high performance home building, and as a simplified tool to be used as part of any builder's on-site quality control procedures.

Report describing a deep energy retrofit project for a two-family wood framed home located in Belmont, Massachusetts.

Book describing Carpentry and Construction, Construction Materials, Hand Tools, Power Tools, Construction Equipment, Jobsite Safety, and Working Conditions, Building Design and Print reading, Inspections Survey Instruments and Operations, Foundation and Outdoor Slab Construction, Floor, Wall, and...

Report summarizing the key opportunities, gaps, and barriers identified by the national laboratory white papers discussing long-term 50% energy reduction goals.

Webpage describing electric vehicle chargers

A simple three-step guide for homeowners who are looking to replace existing light bulbs with more energy-efficient, higher-performing bulbs.

Website describing technical expertise and support regarding electric vehicle infrastructure.

Research study comparing various retrofit models in Wisconsin to evaluate performance in terms of savings per home and program cost per home to assess the relative cost effectiveness of each program design.

Two hourly energy simulation software, BEopt and Energy Gauge USA, were compared to ensure accuracy and evaluate agreement on the impact of various energy efficiency improvements.

Website providing building science based guidance and training for residential construction.

Report describing costs associated with non-residential electric vehicle charging, including multifamily properties.

Guidance document on deep energy retrofits.

Part of a larger LBNL report (Deep Energy Retrofit Guidance for the Building America Solutions Center), the Design and Construction Process chapter provides detailed guidance for each process phase: pre-planning, planning, construction, test-out and post-occupancy.

Part of a larger LBNL report (Deep Energy Retrofit Guidance for the Building America Solutions Center), the Lessons Learned chapter focuses on successful deep energy retrofit projects throughout the U.S.

Report describing the progress toward and issues related to developing a usable, standardized, empirical data-based software accuracy test suite.

FEMA risk management series guide on hospital safety and resilience to natural disasters.

Guide describing design recommendations to ensure that electric vehicle charging stations comply with the Americans with Disabilities Act

Report providing information on ways to incentivize funding of hazard mitigation programs.

Website for finding policies and incentives by state for renewables and efficiency.

Journal article presenting a discussion of the state-of-the- art in electricity management in smart homes, the various enabling technologies that will accelerate this concept, and topics around consumer behavior with respect to energy usage.

Report describing guidance for selecting an electric vehicle charger

Report describing market trends for electric vehicles and summarizing energy codes and standards in the United States related to electric vehicles.

Document describing information on levels of electric vehicle charging.