Library

Article describing vapor retarder requirements in the International Residential Code and International Building Code 2021.

Article describing methods for venting a vented attic and a roof assembly over an unvented attic.

Report investigating implemention of advanced power strips for entertainment and home office electronics would reduce energy consumption across the residential market.

Website reporting efficiencies for dehumidifiers, room air conditioners, and room air cleaners that are tested by independent laboratories and reported by the Association of Home Appliance Manufacturers.

Article about different types of weather resistant barrier.

Technical report describing how the FSEC Energy Research Center explores low-cost space-conditioning upgrades for existing homes by integrating centrally located, high-efficiency ductless mini split heat pumps with older but functional central space conditioning systems, aiming to achieve energy...

Report with updated energy consumption data for 28 residential & commercial miscellaneous electric loads (MELs), including projections to 2040.

Technical fact sheet describing ways to construct asphalt shingle roofs to be more resistant to high winds and hurricanes; also published in FEMA P-499 “Home Builder’s Guide to Coastal Construction: Technical Fact Sheet Series.”

Web based tool providing decision-making guidance for selecting wall assembly components.

Article describing the control layers (air, thermal, and vapor barriers) needed to build homes successfully in very cold locations.

Article describing customer tip sheet and how ceiling fans are one of the most popular and generally well regarded of all home energy efficiency features.

Information sheet discussing how OSB will define the future of the structural sheathing market. OSB will define the future of the structural sheathing market. - See more at: http://bct.eco.umass.edu/publications/by-title/choosing-between-oriented-strandboard-and-plywood/#sthash.RilEtDpl.dpuf

Part 2 of an article discussing how to maximize two-pipe steam systems for resident space heating.

Standard covering requirements for the assembly, installation, maintenance, and operation of controls and safety devices on automatically operated boilers directly fired with gas, oil, gas-oil, or electricity, having fuel input ratings under 12,500,000 Btu/hr.

Technical report describing algorithms that use communicating thermostat heating data and that were developed to optimize customer adoption of energy conservation measures, enhancing the identification of retrofit opportunities, estimating post-retrofit energy savings, and enabling home-specific...

The main principle of smart ventilation used in this study is to shift ventilation from time periods with large indoor-outdoor temperature differences, to periods where these differences are smaller, and their energy impacts are expected to be less.

Fact sheet describing drip irrigation for landscaping.

Website for finding policies and incentives by state for renewables and efficiency.

Report describing an investigation into multiple occupancy-based ventilation control strategies and the associated energy savings.

Website describing analyses for products and standards affecting home heating, cooling, and appliances, in regards to technical, economical, and energy efficiency pathways.

Article by Energy Saver on how to save energy with your thermostat.

Website providing consumer information about ceiling fans, including specifications and buying guidance.

DOE-sponsored report describing the experimental setup and results of field studies on using interior cellular shading attachments to reduce solar heat gain in summer and reduce heat loss in winter.

DOE-sponsored report describing the experimental setup and results of field studies on using exterior fabric shading attachments to reduce solar heat gain, reduce glare, and improve comfort.

Information sheet about what length screws should be used, and how closely to space the screws when fastening furring strips to a foam-sheathed wall.

Factsheet describing ways to install sheathing over existing 1x roof decking.

Checklist describing requirements for roof sheathing along the gable end truss or rafter to achive a FORTIFIED Roof, including New Roof designations and exceptions.

Webpage describing homeowner resources program designed to strengthen homes and commercial buildings against severe weather such as high winds, hail, hurricanes, and even tornadoes.

Checklist highlighting key concepts of wind design uplift pressures and design uplift pressure ratings for proper selection and installation of residential roof covering systems to comply with section R905.1 of the 2015 International Residential Code for a FORTIFIED Roof™–New Roof designation.

Checklist providing selection and installation guidance for residential, non-structural metal roof systems installed over wood roof decks with a roof slope 2:12 or greater to comply with section R905.1 of the 2015 IRC for a FORTIFIED Roof – New Roof Designation.

Checklist providing additional guidance and options for asphalt shingle installations at roof edges, intersections and valleys.

Website offering an online training that teaches disaster-resistant best practices for roofers.

Document that gives a step-by-step approach for designing attachments for cladding materials through foam sheathing.

Webpage providing basic information on various types of heat pumps and their applications in Massachusetts.

Article describing how to use radiator inlet orifices optimize two-pipe steam heating systems.

Article showing steps for kick out flashing at roof-wall intersection.

Report on performance of current diagnostics as well as a draft test method for use in future air flow evaluations.

Guidance on performance of current diagnostics as well as a draft test method for use in future air flow evaluations.

Siding installation guide for Ply Gem Siding Group products.

Report describing a lighting and smart power strip retrofit evaluation that was conducted on 56 all-electric, existing Florida homes to see how lighting and miscellaneous electric loads might be reduced.

Discussion of building sheathing.

Report covering wind loading on roofing assemblies.

Fact sheet describing proper roof sheathing installation and illustrating fastening methods that will enhance the durability of a building in high-wind areas; also published in FEMA P-499 “Home Builder’s Guide to Coastal Construction: Technical Fact Sheet Series.”

Infographic providing details on choosing the right advanced power strip based on your habits to reduce the electricity wasted when your electronic devices are idle.

Specifications to assist builders in designing and constructing homes equipped with a set of features that make the installation of solar energy systems after the completion of the home’s construction easier and less expensive.

Guide describing the installation of windows in walls that have foam plastic insulating; guide provides several methods for attaching, supporting, and flashing windows in walls with rigid foam sheathing. (Note: The link only goes to the table of contents for the guide, the full guide can be...

Information sheet describing correct application of stucco.

Discussion of building sheathing.

This document covers a description of the need and applied solutions for supplemental dehumidification in warm-humid climates, especially for energy efficient homes where the sensible cooling load has been dramatically reduced.