Library

Checklist describing requirements for roof sheathing along the gable end truss or rafter to achive a FORTIFIED Roof, including New Roof designations and exceptions.

Checklist highlighting key concepts of wind design uplift pressures and design uplift pressure ratings for proper selection and installation of residential roof covering systems to comply with section R905.1 of the 2015 International Residential Code for a FORTIFIED Roof™–New Roof designation.

Checklist providing selection and installation guidance for residential, non-structural metal roof systems installed over wood roof decks with a roof slope 2:12 or greater to comply with section R905.1 of the 2015 IRC for a FORTIFIED Roof – New Roof Designation.

Checklist providing additional guidance and options for asphalt shingle installations at roof edges, intersections and valleys.

Website offering an online training that teaches disaster-resistant best practices for roofers.

Results from a research program testing airtightness, implications of air leakage and contaminant reduction over the garage-to-house interface.

Document describing the emissions criteria for carpets, cushions, and adhesives to qualify as those with low volatile organic compound (VOC) emissions under the Carpet and Rug Institute's Green Label Plus Indoor Air Quality Testing Program.

Standard describing GREENGUARD Emission Criteria for use with GREENGUARD Certification Program for Low Emitting Products.

Guidance from HUD for volunteer team leaders, project managers and supervisors who work in recovery and rebuilding after natural disasters.

Report about opportunities for ventilation when traditional methods are limited by weather conditions or by contaminants in the outdoor air.

Document that gives a step-by-step approach for designing attachments for cladding materials through foam sheathing.

Webpage providing maps and information to assess the particular hazards and risks for an area.

Webpage that describes health problems that can be caused by secondhand smoke.

Guidance from EPA, FEMA, HUD, and NIH on how to deal with asbestos in homes following natural disasters.

Homeowner guidance from CDC, EPA, FEMA, HUD, and NIH on how to safely clean up mold issues following flooding from a natural disaster.

Guidance from EPA, FEMA, HUD, and NIH on homeowner safety dealing with lead contaminants.

Article describing considerations for choosing a room-level air cleaner to improve indoor air quality.

Companion document to the Indoor airPLUS Construction Specifications, providing guidance on identifying compliant products, including industry databases and examples of product labeling.

Report outlining results from a 2005 hygrothermal pilot study in the South.

Book providing project management guidance in maintaining satisfactory indoor air quality (IAQ) of occupied buildings undergoing renovation or construction.

Research study describing the impact resistance performance of advanced framed wall systems with insulating sheathing as the primary sheathing from wind blown debris.

Report discussing the importance of durability and energy efficiency in building construction.

Article describing ways home owners can improve ventilation in their kitchens.

Webpage describing indoor air quality.

Standard supporting indoor air quality performance by producers, purchasers and policy makers to improve the environmental performance of products and services.

Resource hub describing indoor air quality research performed by Lawrence Berkeley National Laboratory.

Website helping builders, designers, and home energy raters find products that are compliant with the EPA Indoor airPLUS Construction Specification requirements for low-emission materials.

Document outlining specifications that were developed by the U.S. Environmental Protection Agency (EPA) to recognize new homes equipped with a comprehensive set of indoor air quality (IAQ) features.

Website providing the technical specifications and related documents for home builders, subcontractors, architects, and other housing professionals interested in certifying a home to the EPA's Indoor airPLUS program requirements.

Article showing steps for kick out flashing at roof-wall intersection.

Guidance from EPA, HUD, NIH, and OSHA on worker and employer interactions with lead contaminants.

Report on the impact of air sealing between the foundation and the living space on radon transport reduction across the foundation and living space floor assembly at fifteen home.

Website providing links to the EPA developed map of radon risk in the United States.

Siding installation guide for Ply Gem Siding Group products.

Case study about how to properly tape insulating sheathing drainage planes.

Website providing medical information about malignant mesothelioma, a cancer related to asbestos exposure.

Discussion of building sheathing.

Report providing extensive guidance on controlling moisture in building envelopes through proper selection and installation on air, water, thermal, and vapor barriers.

Brochure discussing specific practices for mitigating moisture and mold during the construction process.

Online course describing mold and mold remediation for environmental and public health professionals.

Online course providing an overview of mold prevention and mold remediation.

Worker guidance from EPA, HUD, NIH, and OSHA on how to deal with mold in homes following natural disasters.

Standard containing requirements for carbon monoxide (CO) detection and warning equipment intended to protect lives by warning occupants of the presence of CO in sufficient time to allow occupants to escape or take other appropriate action.

Standards for paints and coatings.

Report covering wind loading on roofing assemblies.

American Lung Association web page providing information on particulate matter and indoor air quality.

Article describing particulate matter (PM), what it is, how it can be harmful, and what can be done about it.

Website describing particulate matter (PM) pollution.

Standards for requirements, performance, construction, workmanship and others for structural-use panels.