Library

Document providing descriptions of the many insulation options available to homeowners, along with guidance on where, when, and how to install insulation throughout your house.

ENERGY STAR factsheet describing the HVAC Quality Installation Program

Section 608 establishes EPA’s National Recycling and Emission Reduction Program designed to reduce emissions related to maintaining, servicing, repairing, and disposing of air conditioning or refrigeration equipment.

Case study on exhaust ventilation and corresponding outdoor air intake strategies implemented in high-performance new-construction multifamily buildings.

The New York State Energy Research and Development Authority (NYSERDA) is interested in finding cost-effective solutions for deep energy retrofits (DERs) related to exterior wall insulation in a cold climate, with targets of 50% peak load reduction and 50% space conditioning energy savings.

List of guidelines for plants and their fire resistance from FIRESafe Marin.

Updated wildfire risk assessment, community impacts, and building science measures following the disastrous 2020 wildfire season in the western U.S.

A webpage discussing how water heater expansion tanks operate and how to repair them.

Article describing EV charging, charger features, and other considerations for picking and installing EV chargers.

Factsheet describing how to install air source heat pumps for residential heating and cooling in cold climates.

Factsheet describing how to install air source heat pumps for residential heating and cooling in cold climates.

A article about the best practice method of installing fiber cement siding, to install flashing at the butt joints of the siding boards, rather than face caulking the butt joints afterwards.

Report describing the advantages and best practices for installing heat pump water heaters (HPWH), highlighting their improved energy efficiency, reliability, and critical considerations such as condensate management, proper sizing, and optimal installation location to enhance performance and...

Information sheet presenting techniques for installing cellulose insulation.

Factsheet describing how to partially install a heat pump in a manufactured home in the manufactured home factory.

Book providing project management guidance in maintaining satisfactory indoor air quality (IAQ) of occupied buildings undergoing renovation or construction.

Journal article detailing laboratory and simulation studies quantifying the impact that heat pump and air conditioner installation faults have on system capacity and efficiency.

A guide for users and energy raters of insulated siding as home insulation.

Website providing builders with information about meeting RESNET Grade 1 criteria when installing insulation.

The purpose for this document is to provide basic guidance on the use of proven installation techniques that can be used by installers to help ensure correct “dense pack” application of JM Spider® in drill & fill applications.

Article providing guidance for installing manufactured stone veneer, including information on rainscreens.

Website providing information about Knauf Insulation.

Webpage published by the National Fire Protection Agency (NFPA) that lists more than 300 consensus codes and standards intended to minimize the possibility and effects of fire and other risks.

Measure Guideline describing how to assess and carry out the isolation of natural draft combustion appliances from the conditioned spaces of low-rise residential buildings.

This measure guideline provides guidance on combustion safety inspection procedures for appliances and heating equipment that use indoor air for combustion and dilution of flue gases in low-rise residential buildings.

Report providing step-by-step instructions for heating contractors and hydronic designers for selecting the proper control settings to maximize system performance and improve response time when using a thermostat setback.

This Measure Guideline provides design and construction information for a deep energy enclosure retrofit solution of a flat roof assembly.

Book with indepth information about hydronic systems for residential and commercial buildings.

This report is designed to meet ASHRAE 62.2-2010/2013 and ANSI/ACCA’s 5 QI-2015 protocol, thereby improving the performance of HVAC equipment in new homes when compared to homes built to minimum code.

Report investigating what motivates remodelers to become energy-focused and what technical knowledge that need to be energy-focused.

An article about double-hung windows.

This standard provides a benchmark for safe electrical design, installation, and inspection to protect people and property from electrical hazards and has been adopted in all 50 states.

Standard containing requirements for carbon monoxide (CO) detection and warning equipment intended to protect lives by warning occupants of the presence of CO in sufficient time to allow occupants to escape or take other appropriate action.

Fact sheet poster describing an online tool offered within the Building America Solution Center which provides construction guidance for builders and contractors in building and renovating homes to be more resistant to natural disasters such as hurricanes, flooding, earthquakes and wildfires, etc.

This page provides important information on how to protect yourself and your family if you suspect that you might have vermiculite insulation from Libby, Montana.

Information sheet including a checklist of steps to follow for pouring concrete.

Webpage describing the Quality Install Tool, an open-source web app designed to simplify, standardize, and expedite the creation of high-quality installation documentation for HVAC installations and efficiency upgrades.

Fact sheet describing best practices in installing leak-free refrigerant systems, including specifics on creating flare joints and brazed joints, pressure testing, vacuum testing, and charging the system with refrigerant.

Standard covering provisions for electrically operated single- and multiple-station carbon monoxide (CO) alarming devices used in various types of residential occupancies to protect against acute effects of exposure to CO. This version of the standard, originally published in 2001 and revised in...

Standard covering provisions for electrically operated single- and multiple-station carbon monoxide (CO) alarming devices used in various types of residential occupancies to protect against acute effects of exposure to CO. This version of the standard, originally published in 2017 and revised in...

Presentation providing information about correctly installing ductwork in new and existing homes.

U.S. DOE report summarizing findings from literature and research relevant to HVAC installation practices.

Presentation describing RESNET grading criteria for insulation installation.

Recovery advisory guide providing guidance on existing code requirements as well as recommend best practices for attachment design, installation, and maintenance of rooftop solar panels to increase panel wind resistance in the U.S. Virgin Islands after Hurricane Maria.

Factsheet describing air-sealing.

Technical study exploring the impact of different installation faults on heat pump performance in a single-family house.

Second part of an article series focusing on servicing high efficiency modcon boilers. This part focuses on paperwork and follow-up communication with the homeowner for scheduling annual maintenance.

Article describing the author's experiences in owning and servicing a modcon boiler.

High-density sidewall cavity insulation can be a major comfort and savings boost. It saves energy by slowing both conductive and convective losses, but only if the right things are done and done right. This always requires site-specific thinking.

Webpage describing the STEP campaign encouraging the use of smart diagnostic tools to reduce installation faults.