Guides A-Z

This guide describes IECC 2009 and ENERGY STAR Certified Homes insulation requirements.

This guide describes IECC 2012 and DOE Zero Energy Ready Home insulation requirements.

This guide provides information about installing Insulating sheathing above the roof deck on existing homes. This retrofit assembly is appropriate for homes with conditioned attics or where the retrofit is intended to create a conditioned attic.

Guide describing how to frame and insulate corners to reduce the heat loss and gain though structural framing.

Guide describing how to insulate headers over doors and windows to reduce heat loss and heat gain through solid wood framing.

Guide describing how to frame and insulate exterior-to-interior wall intersections to reduce the heat loss and gain though structural framing.

Guide describing how to minimize framing around doors and windows to reduce heat loss.

Guide describing how to frame a wall with minimal wall studs to prevent heat loss through walls.

Guide describing how to air seal attic access panels, doors, and stairs to provide a continuous air barrier at the ceiling.

Guide describing how to air seal bathroom and kitchen exhaust fans.

Guide describing how to air seal doors that are next to unconditioned spaces.

Guide describing ways to seal drywall to the top plate of an exterior wall to air seal the wall cavity.

Guide describing how to air seal duct and flue shafts. 

Guide describing how to air seal electrical wiring throughout a home.

Guide describing how to air seal around light tubes.

Guide describing how to air seal modular home marriage joints.

Guide describing how to air seal the gap between the drywall shaft wall (i.e., common wall) and the structural framing between units in multifamily housing.

Guide describing how to air seal around plumbing and other piping.

Guide describing how to air seal around recessed light fixtures. 

Guide describing how to air seal sill plates in new and existing homes.

Guide describing how to correctly seal structural insulatel panel (SIP) seams.

Guide describing how to air seal a whole-house fan system.

Guide describing how to air seal the rough openings around doors and windows.

Guide describing a method for insulating an unvented attic by spraying foam insulation along the underside of the roof deck.

Guide providing information about constructing a roof with full insulation at the eaves.

Guide describing application of a radiant barrier layer in the attic to block radiant heat transfer between hot surfaces and heat-absorbing surfaces.

Guide describing how to increase insulation in existing homes by installing batt insulation on the ceiling plane of a vented attic.

Guide describing how to add spray foam insulation to the underside of the existing roof deck.

Guide describing blown insulation into exterior wall cavities of existing homes with minimal disruption to occupants.

Guide describing how to insulate a vented attic in an existing home using blown insulation added to the attic floor.

Guide describing how to air seal and insulate a cantilevered floor.

Guide describing a complete window replacement in existing homes.

Guide describing how to install continuous air barriers in exterior walls.

This guide describes air barrier and insulation installation, along with air sealing for double walls - half or full walls included in a home design as an architectural feature that provides a more dimensional appearance.

Guide describing construction and insulation techniques for double wall framing.

Guide describing how to insulate and air seal dropped ceilings and soffits to prevent air leakage.

Guide describing method for designing and installing ducts in a raised ceiling chase. 

This guides describes buried ducts in loose-fill attic insulation, a method that can only be used in dry climates.

This guide describes approaches to buryng and encapsulating ducts in unconditioned attics to increase the overall R-value of duct insulation.

Guide describing method for installing ducts in a duct chase above a dropped ceiling.

Guide that illustrates how and when to encapsulate ductwork in unconditioned attics, increases the R-value of duct insulation, mitigating condensation issues and reducing air leakage.

This guide provides criteria and installation guidance for ENERGY STAR windows.

Guide describing how to insulate a new foundation wall or an existing foundation wall by adding rigid insulation to the exterior side.

Guide describing how to create an air barrier between the garage and the conditioned space above it to prohibit pollutants from entering a home's interior.

Guide describing how to air seal and insulate the floor above an unconditioned basement or crawl space.

Guide describing the air sealing of rim joists on walls connecting homes and attached garages.

Guide describing how to insert a replacement window in an existing home.

Guide describing how to install insulated concrete forms to block excessive heat loss and gain though structural framing.

Guide illustrating how to insulate a floor over unconditioned space with conditioned space above by adding insulation and air sealing.

Guide describing air sealing of non-ICAT recessed lights installed in accessible attics of existing homes.

Pages

Filter By BASC Keywords