Guides A-Z

Showing results 1 - 50 of 63

Description
Guide describing repair and reconfiguration of air handler closet and platform when replacing air handler.
Description
Guide describing how to install a bathroom fan to remove excess moisture, cleaning chemical fumes, etc.
Description
Guide describing the bathroom exhaust fan ENERGY STAR rating requirements.
Description
Guide describing combustion furnaces with compliance and installation guidance.
Description
Guide describing design and installation of compact duct systems for central heating and cooling systems.
Description
Guide describing compression cooling air conditioning systems for space cooling.
Description
Guide describing condensing boilers and hot water heat distribution systems used for home heating.
Description
Guide describing categories of direct-vent combustion space- and water-heating equipment and combustion safety testing.
Description
Guide describing how to conduct duct leakage tests on all components of the HVAC system (including the air handler, ductwork, register boxes/boots, and all air devices such as diffusers, registers, or grilles).
Description
Guide describing how to install ducted returns in bedroom walls to balance air pressures between rooms and to enable stale air to return to a central heating system's air handler for reconditioning even when room doors are closed.
Description
Information guide describing the use of ECM fan motors in air handlers used for heating, cooling, and ventilation.
Description
This guide describes evaporative cooling technologies which can be used to cool homes in dry climates.
Description
Guide describing gas-fired boilers and hot water heat distribution systems used for home heating.
Description
This guide describes the uses, selection process, and specification of high-MERV filters.
Description
Guide describing how to install jump ducts in bedroom walls to balance air pressures between rooms and to enable stale air to return to a central heating system's air handler for reconditioning even when room doors are closed.
Description
Guide describing how to design HVAC systems to be located within the conditioned space of the home, either in a utility closet or in an air sealed conditioned attic, basement, or crawl space.
Description
Guide describing removal of construction debris from flex ducts and protection of ducts and HVAC equipment during construction to keep them free of dust and debris.