Skip to main content

Guides A-Z

Showing results 1 - 36 of 36

Description
Guide describing application of a radiant barrier layer in the attic to block radiant heat transfer between hot surfaces and heat-absorbing surfaces.
Description
Guide describing effective ways to distribute hot water using either a core (compact) plumbing layout or a central homerun manifold piping system.
Description
Guide describing how to properly construct decks and other building attachments to be resistant to ignition in the event of a wildfire.
Description
Guide describing the use of recirculation pumps to speed the flow of hot water to faucets for reduced wait times and savings in energy and water usage.
Description
To minimize flood risks with new construction, homes should be built on high ground outside of high-risk flood areas and above the base flood elevation (BFE). New homes should be constructed in conformance with the National Flood Insurance Program (NFIP) and local floodplain management regulations...
Description
Overview guide describing residential floodproofing steps.
Description
Information guide describing how to apply a whole-house approach to home improvement with energy efficiency upgrades, improved indoor air quality, and increased comfort.
Description
Guide describing how to design HVAC systems to be located within the conditioned space of the home, either in a utility closet or in an air sealed conditioned attic, basement, or crawl space.
Description
This information guide describes the need to install a solar bypass valve on the existing hot water tank for a future solar hot water system installation.
Description
Guide describing options for designing and locating the thermal boundary at either the attic floor or along the roof line in new and existing homes.
Description
Guide describing how to install ventilation air inlets in open locations at a safe distance from potential air contamination sources.
Description
Guide describing options for adding dehumidification equipment to a home to maintain indoor relative humidity below 60%.