Skip to main content

Guides A-Z

Showing results 1 - 37 of 37

Description
Guide describing how to insulate a basement to improve the overall thermal performance of the building and provide more dry, usable conditioned space for home occupants and for HVAC equipment.
Description
Guide providing information about constructing a roof with full insulation at the eaves, and insulating eaves in existing homes.
Description
This guides describes how to insulate and air seal attic knee walls and floor joist cavities under knee walls.
Description
Guide describing application of a radiant barrier layer in the attic to block radiant heat transfer between hot surfaces and heat-absorbing surfaces.
Description
This guide describes installation procedures for continuous rigid insulation to help provide thermal protection and reduce thermal bridging; depending on the product it may also serve as structural sheathing, or the moisture control layer.
Description
Guide that illustrates how and when to encapsulate ductwork in unconditioned attics, increases the R-value of duct insulation, mitigating condensation issues and reducing air leakage.
Description
Guide describing materials and methods for incorporating thermal mass into the construction of a home for temperature regulation, energy savings, and resistance to extreme heat and cold.
Description
Guide describing how to insulate slabs on grade in climate zones 3 and higher.
Description
Guide describing methods for insulating an unvented crawlspace or conditioned basement with rigid foam on the interior side of the walls to provide an insulated space for HVAC equipment.
Description
Guide describing options for designing and locating the thermal boundary at either the attic floor or along the roof line in new and existing homes.
Description
This guide describes how to install a rigid air barrier to separate the porch attic from the conditioned space.
Description
Guide describing wind washing and how to prevent it.