Skip to main content

Guides A-Z

Showing results 1 - 50 of 112

Description
Guide describing how to insulate a basement to improve the overall thermal performance of the building and provide more dry, usable conditioned space for home occupants and for HVAC equipment.
Description
Guide discussing disaster resistance related to asphalt shingle roofing when installing roofing on new construction or when repairing or replacing roofing on existing homes.
Description
Guide providing information about constructing a roof with full insulation at the eaves, and insulating eaves in existing homes.
Description
This guides describes how to insulate and air seal attic knee walls and floor joist cavities under knee walls.
Description
Guide describing the use of attic ventilation fans to mechanically pull outside air through the attic in an attempt to cool the attic, control moisture, and prevent ice dams.
Description
Guide describing different types of gas shutoff valves to shutoff the flow of natural gas into a home to stop gas spills due to an accident or natural disaster.
Description
Guide providing information about flashing around a chimney to protect the intersection of the roof and chimney walls from water intrusion and anchoring of a chimney to prevent collapse in high winds.
Description
Guide discussing disaster resistance related to clay or concrete tile roofing when installing roofing on new construction or when repairing or replacing roofing on existing homes.
Description
Guide describing combustion furnaces with compliance and installation guidance.
Description
Guide describing condensing boilers and hot water heat distribution systems used for home heating.
Description
Guide describing how to properly construct decks and other building attachments to be resistant to ignition in the event of a wildfire.
Description
To minimize flood risks with new construction, homes should be built on high ground outside of high-risk flood areas and above the base flood elevation (BFE). New homes should be constructed in conformance with the National Flood Insurance Program (NFIP) and local floodplain management regulations...
Description
Information guide describing ways to design a home to be resistant to extreme heat.
Description
Guide describing categories of direct-vent combustion space- and water-heating equipment and combustion safety testing.
Description
Guide describing the installation of roof vents that are resistant to damage from high winds and entry of wind-borne rain, wildfire embers, or pests.
Description
Overview guide describing how to prepare homes to be resistant to earthquake forces.
Description
Guide describing how to provide a continuous water control layer across the roof assembly by sealing all penetrations for pipes, vents, etc. in existing roofs.
Description
Guide describing how to install flashing that is integrated with air and water control layers around piping, vents, and other wall penetrations as part of an exterior wall retrofit.
Description
Overview guide describing residential floodproofing steps.