Skip to main content

Guides A-Z

Showing results 1 - 36 of 36

Description
Advanced framing is a collection of strategies used to reduce the amount of lumber in walls which allows more room for insulation and thus decreases the heat loss and gain as well as lumber costs. Traditional wall framing often uses more studs and thus more lumber than necessary to support the...
Description
Guide describing how to insulate a basement to improve the overall thermal performance of the building and provide more dry, usable conditioned space for home occupants and for HVAC equipment.
Description
Guide describing how to air seal the gap between the drywall shaft wall (i.e., common wall) and the structural framing between units in multifamily housing.
Description
This guides describes how to insulate and air seal attic knee walls and floor joist cavities under knee walls.
Description
This guide describes installation procedures for continuous rigid insulation to help provide thermal protection and reduce thermal bridging; depending on the product it may also serve as structural sheathing, or the moisture control layer.
Description
This guide describes air barrier and insulation installation, along with air sealing for double walls - half or full walls included in a home design as an architectural feature that provides a more dimensional appearance.
Description
Guide describing how to install insulated concrete forms to block excessive heat loss and gain though structural framing.
Description
Guide describing how to upgrade a wall with a floor overhang (or cantilever) on an existing home by adding rigid insulating sheating and or closed-cell spray foam insulation and air sealing.
Description
Guide describing how to create a fully aligned air barrier behind a staircase.
Description
This measure guides describes how to install structural insulated panels to block excessive heat loss and gain though structural framing.
Description
This guide describes how to install a rigid air barrier to walls behind fireplaces.