Log in or register to create Field Kits and Sales Worksheets. Why register?

Library

This library contains research reports produced by the Building America program and other building science resources used to support this Solution Center. The materials cover both new construction and existing homes. Use the search box and/or the filters to explore hundreds of residential building resources. Access to some references not produced by Building America may require purchase from the publisher. Documents are listed alphabetically. While we continually update our database, links may have changed since posting. Please contact our webmaster if you find broken links.

Author(s): Mallay, Wiehagen, Kochkin
Organization(s): PHI, Home Innovation Research Labs

Report on the design and evaluation of extended plate and beam.

Author(s): Mallay, Wiehagen, Kochkin
Organization(s): PHI
Report on the design and evaluation of extended plate and beam.
Author(s): Baker, Lepage
Organization(s): Building Science Corporation
Publication Date: January, 2014

Report on the stability of furring strips as a means for cladding attachment over walls with thick exterior rigid insulation.

Author(s): Kochkin, Wiehagen
Organization(s): Home Innovation Research Labs
Publication Date: January, 2016

The Guide addresses walls constructed with 2x4 wood frame studs, wood structural panel sheathing (WSP) as wall bracing and added backing for foam sheathing, a layer of rigid foam sheathing insulation up to 1.5 inches thick over the WSP, and a cladding system installed over the foam sheathing in low-rise residential buildings up to three...

Author(s): Kochkin, Wiehagen
Organization(s): Home Innovation Research Labs
Publication Date: January, 2016

Part I of the Guide addresses walls constructed with 2x6 wood frame studs, wood structural panel (WSP) sheathing as exterior sheathing, gypsum board as interior sheathing, and a cladding system installed over WSP sheathing in low-rise residential buildings up to three stories in height. Walls with exterior board insulation are addressed in...

Author(s): Wiehagen, Kochkin
Organization(s): PHI, Home Innovation Research Labs
Publication Date: August, 2015

Report on high-R wall design called extended plate and beam that uses foam sheathing insulation with wall framing.

Author(s): Herk, Poerschke
Organization(s): IBACOS
Publication Date: April, 2015
The New York State Energy Research and Development Authority (NYSERDA) is interested in finding cost-effective solutions for deep energy retrofits (DERs) related to exterior wall insulation in a cold climate, with targets of 50% peak load reduction and 50% space conditioning energy savings.
Author(s): Baker
Organization(s): Building Science Corporation, National Renewable Energy Laboratory
Publication Date: January, 2013

Research study developing baseline engineering analysis to support the installation of thick layers of exterior insulation (2 in. to 8 in.) on existing masonry walls and wood framed walls.

Author(s): Dickson
Organization(s): IBACOS, National Renewable Energy Laboratory
Publication Date: January, 2013

Report discussing principles and approaches to closing and conditioning ventilated crawlspaces in existing homes. 

Author(s): Building Science Corporation
Organization(s): Building Science Corporation
Publication Date: October, 2007

Guide provides information about enhanced thermal enclosures and performance.

Author(s): Building Science Corporation
Organization(s): Building Science Corporation
Publication Date: May, 2009

Brochure with information on installing cavity insulation.

Author(s): Dickson
Organization(s): IBACOS
Publication Date: December, 2011
Report covering the fundamental waterproofing strategies for tub and shower assemblies.
Author(s): Lepage, Schumacher, Lukachko
Organization(s): Building Science Corporation
Publication Date: November, 2013

Report explaining moisture-related concerns for high R-value wall assemblies and discusses past Building America research work that informs this study.

Author(s): Faakye, Arena, Griffiths
Organization(s): CARB, Steven Winter Associates, SWA
Publication Date: July, 2013

Research study exploring a test method measuring air leakage between units through common surfaces and air infiltration across exterior, noncommon surfaces of the enclosure.

Author(s): Ridouane
Organization(s): NREL
Publication Date: January, 2012
Document about development of models for evaluating thermal performance of walls in existing homes that will improve the accuracy of building energy simulation tools when predicting potential energy savings of existing homes.
Author(s): Tabares-Velasco, Christensen, Bianchi, Booten
Organization(s): NREL
Publication Date: July, 2012
Report summarizing NRELs efforts to develop diagnostic test cases to conduct accurate energy simulations when phase change materials (PCMs) are modeled in residential buildings.
Author(s): Smegal, Lstiburek
Organization(s): Building Science Corporation
Publication Date: April, 2012

Report summarizing current research, summarizes issues that have been experienced with current best practices, and recommends ways in which the best practices can be improved for water managing sheathings.