Log in or register to create Field Kits and Sales Worksheets. Why register?

Library

This library contains research reports produced by the Building America program and other building science resources used to support this Solution Center. The materials cover both new construction and existing homes. Use the search box and/or the filters to explore hundreds of residential building resources. Access to some references not produced by Building America may require purchase from the publisher. Documents are listed alphabetically. While we continually update our database, links may have changed since posting. Please contact our webmaster if you find broken links.

Author(s): Singer, Delp, Apte
Organization(s): Lawrence Berkeley National Laboratory
Publication Date: January, 2010

Report on the performance of range hood exhaust fans.

Author(s): Architectural Energy Corporation
Organization(s): Architectural Energy Corporation
Publication Date: November, 2011
Article describing RESNET guidance on evaporative coolers.
Author(s): Maxwell, Berger, Zuluaga
Organization(s): CARB, Steven Winter Associates, SWA
Publication Date: July, 2014

Report outlining research that helps inform best practices for air sealing multi-family buildings in the Northeast.

Author(s): Kerrigan, Norton
Organization(s): Building Science Corporation
Publication Date: October, 2014

In this report, BSC seeks to research and report on the field monitoring of the performance of in-situ supplemental dehumidification systems in low-energy, high performance, homes in a Zone 2 climate.

Author(s): Ridouane
Organization(s): National Renewable Energy Laboratory
Publication Date: September, 2011

Research study evaluating operating conditions required to maintain uniform mixing, within high performance homes, under both heating and cooling conditions.

Author(s): ENERGY STAR
Organization(s): ENERGY STAR
Publication Date: January, 2016

Program criteria for residential exhaust fans used for ventilation.

Author(s): U.S. Environmental Protection Agency
Organization(s): EPA
Publication Date: November, 2015

This report is designed to meet ASHRAE 62.2-2010/2013 and ANSI/ACCA’s 5 QI-2015 protocol, thereby improving the performance of HVAC equipment in new homes when compared to homes built to minimum code.

Author(s): U.S. Environmental Protection Agency
Organization(s): EPA
Publication Date: October, 2014

Website providing consumer information about ceiling fans, including specifications and buying guidance.

Author(s): Yee, Baker, Brand, Wells
Organization(s): PARR, Midwest Energy Efficiency Alliance
Publication Date: August, 2013

Report using pre- and post-system upgrade data to analyze the energy savings associated with Iowas HVAC SAVE program for space heating.

Author(s): Cummings, Withers
Organization(s): BA-PIRC, Florida Solar Energy Center, FSEC
Publication Date: December, 2011

Research study describing experiments run in an unoccupied 1600 ft2 house to evaluate the delivered performance as well as the relative performance of a SEER 21 variable capacity heat pump versus a SEER 13 heat pump.

Author(s): Department of Energy
Organization(s): DOE
Publication Date: June, 2012

Online reference containing general information about geothermal heat pumps.

Author(s): Vieira, Parker, Gu, Wichers
Organization(s): FSEC
Publication Date: January, 2009
Document comparing simulation results from a modified version of the EnergyGauge program to include various HVAC runtime strategies.
Author(s): Turner, Walker
Organization(s): Lawrence Berkeley National Laboratory

This study evaluates the energy, humidity and indoor air quality implications of residential ventilation cooling in all US IECC climate zones.

Author(s): Hodgson, Moyer, Beal
Organization(s): LBNL
Publication Date: September, 2005
A report describing six mechanical ventilation strategies that were evaluated for their ability to control indoor humidity levels over 14-day periods with simulated occupancy.
Author(s): Building Science Corporation
Organization(s): Building Science Corporation
Publication Date: May, 2009

Brochure with information about ducts in conditioned space.

Author(s): Roth, Sehgal, Akers
Organization(s): FCSES
Publication Date: March, 2013
Research report with results from field tests in two homes in Austin, Texas, from October 2011 to June 2012 to evaluate the comfort performance of ductless mini-split heat pumps
Author(s): Building Science Corporation
Organization(s): Building Science Corporation
Publication Date: May, 2009

Brochure with details on HVAC duct air sealing.

Author(s): North American Insulation Manufacturers Association
Organization(s): North American Insulation Manufacturers Association
Publication Date: January, 2010
Information sheet with HVAC duct insulation, testing, maintenance and performance information.
Author(s): AHRI
Organization(s): AHRI
Publication Date: January, 2012
Online database with efficiency information about residential HVAC systems and commercial refrigeration equipment.
Author(s): Less, Walker, Tang
Organization(s): Lawrence Berkeley National Laboratory

The main principle of smart ventilation used in this study is to shift ventilation from time periods with large indoor-outdoor temperature differences, to periods where these differences are smaller, and their energy impacts are expected to be less.

Author(s): McIlvaine, Beal, Fairey
Organization(s): FSEC
Publication Date: October, 2014
This study focuses on the design, construction, and performance of the interior chase approach as implemented by five different builders in Texas, North Carolina, and Florida
Author(s): Woods, Kozubal
Organization(s): National Renewable Energy Laboratory
Publication Date: October, 2013

Report presenting a parametric analysis using a numerical model of a new concept in desiccant and evaporative air conditioning.

Author(s): Cummings, Withers, Kono
Organization(s): BA-PIRC, Florida Solar Energy Center, FSEC

Report on variable-capacity air conditioning and heat pump units.

Author(s): American Society of Mechanical Engineers
Organization(s): American Society of Mechanical Engineers
Publication Date: January, 2012

Standard covering requirements for the assembly, installation, maintenance, and operation of controls and safety devices on automatically operated boilers directly fired with gas, oil, gas-oil, or electricity, having fuel input ratings under 12,500,000 Btu/hr.

Author(s): Poerschke, Beach
Organization(s): IBACOS
Report onhow space-conditioning systems are operating in the field and if these systems are meeting required standards.
Author(s): Poerschke, Beach
Organization(s): IBACOS
Report onhow space-conditioning systems are operating in the field and if these systems are meeting required standards.
Author(s): Schoenbauer, Bohac, Huelman
Organization(s): NorthernSTAR, University of Minnesota
Publication Date: July, 2016

Report describing combined space- and water-heating (combi) systems using a high-efficiency direct-vent burner. 

Author(s): Department of Energy
Organization(s): DOE
Publication Date: August, 2012

IECC code note explaining new fan efficacy requirements, along with how to determine which fans are affected by the new fan requirements.

Author(s): National Air Duct Cleaners Association
Organization(s): National Air Duct Cleaners Association
Publication Date: January, 2013
Manual showing duct cleaning contractors how to identify the different types of insulated air ducts, how to open each type for access by cleaning equipment and personnel, how to close and seal openings after cleaning.
Author(s): Gifford
Organization(s): American Boiler Manufacturers Association
Publication Date: January, 2004
Part 2 of an article discussing how to maximize two-pipe steam systems.
Author(s): Carpenter, Schumacher
Organization(s): ASHRAE
Case study characterization of framing factors for wood-framed low-rise residential buildings.
Author(s): Building Science Corporation
Organization(s): Building Science Corporation
Publication Date: May, 2009

Report about ventilation system design, including central fan integrated supply (CFIS) system, made up of a 6-inch outdoor air intake duct connected to the return side of the air handler with a fan cycling control to make sure the fan runs a programmed minimum amount of time.

Author(s): Gilbride, Baechler, Hefty, Hand, Love
Organization(s): Pacific Northwest National Laboratory, Oak Ridge National Laboratory
Publication Date: August, 2011

Report providing information about energy-efficient heating, ventilation, and cooling (HVAC) equipment options to help homeowners cut their energy use, reduce their carbon footprint, and increase their homes comfort, health, and safety.

Author(s): Air-Conditioning Heating and Refrigeration Institute
Organization(s): Air-Conditioning Heating and Refrigeration Institute
Publication Date: April, 2009
This directory contains the I=B=R Ratings for cast-iron, steel, aluminum and copper boilers, baseboard and finned tube radiation, indirect-fired water heaters, effective as of the date of this publication.
Author(s): National Renewable Energy Laboratory
Organization(s): National Renewable Energy Laboratory
Publication Date: November, 2004

Brochure intended to provide readers with a working knowledge of residential heating and cooling duct systems.

Author(s): Rapp, Less, Singer, Stratton, Wray
Organization(s): Lawrence Berkeley National Laboratory

The exhaust from residential combustion appliances contains air pollutants and high levels of moisture that must be conveyed to the outdoors to maintain acceptable indoor quality.

Author(s): American Society of Mechanical Engineers
Organization(s): American Society of Mechanical Engineers
Publication Date: January, 2017

Code establishing the rules of safety relating only to pressure integrity for the design, fabrication, and inspection of boilers and pressure vessels during construction.

Author(s): ASHRAE
Organization(s): ASHRAE
Publication Date: January, 2013

Standard defining the roles of and minimum requirements for mechanical and natural ventilation systems and the building envelope intended to provide acceptable indoor air quality in low-rise residential buildings.

Author(s): ASHRAE
Organization(s): ASHRAE
Publication Date: January, 2010

This standard defines the roles of and minimum requirements for mechanical and natural ventilation systems and the building envelope intended to provide acceptable indoor air quality in single-family and multi-family low-rise residential buildings of three stories or less above grade.

Author(s): ASHRAE
Organization(s): ASHRAE
Publication Date: January, 2016

ASHRAE Standard 62.1 sets specifications and measures for ventilation system design and indoor air quality.

Author(s): ASHRAE
Organization(s): ASHRAE
Publication Date: January, 2017

Standard establishing a test procedure for evaluating the performance of air-cleaning devices as a function of particle size.

Author(s): ASHRAE
Organization(s): ASHRAE
Publication Date: January, 2017

Guidebook covering basic principles and data used in the HVAC&R industry.

Author(s): RESNET
Organization(s): International Code Council
Publication Date: February, 2016

This Standard provides a consistent, uniform methodology for evaluating the airtightness of building envelopes and heating and cooling air ducts and the air flows of mechanical ventilation systems.

Author(s): ASHRAE
Organization(s): ASHRAE
Publication Date: December, 2013
Standard 55 specifies conditions for acceptable thermal environments and is intended for use in design, operation, and commissioning of buildings and other occupied spaces.
Author(s): ANSI, AHRI
Organization(s): ANSI, AHRI
Publication Date: January, 2015

Standard 680 establishes definitions, classifications, test requirements, data requirements, ratings, operating requirements, marking and nameplate data and conformance conditions for residential air filter equipment.

Author(s): Natural Resources Canada
Organization(s): Natural Resources Canada
Publication Date: April, 2014
Web resource with information for consumers about air source heat pumps.
Author(s): Air Diffusion Council
Organization(s): Air Diffusion Council
Publication Date: January, 2013
Standard that sets forth the specific methods of testing flexible air ducts used for indoor comfort heating, ventilating and air conditioning applications.
Author(s): Air Diffusion Council
Organization(s): Air Diffusion Council
Publication Date: January, 2013
Standard for use and reference by designers, architects, engineers, contractors, installers and users for evaluating, selecting, specifying and properly installing flexible duct in heating and air conditioning systems.
Author(s): National Air Duct Cleaners Association
Organization(s): National Air Duct Cleaners Association
Publication Date: January, 2013
Standard providing industry-backed information for assessing new and existing HVAC systems, evaluating and verifying the cleanliness of HVAC system components, preventing job related hazards and guiding the cleaning and restoration of HVAC systems to a specific level of cleanliness.
Publication Date: January, 2016

Document detailing the requirements, roles, and obligations for participants in an organized effort, ensuring that HVAC installations comply with the ANSI/ACCA 5 QI – 2010 (HVAC Quality Installation Specification) QI Standard.

Pages