Log in or register to create Field Kits and Sales Worksheets. Why register?

Library

This library contains research reports produced by the Building America program and other building science resources used to support this Solution Center. The materials cover both new construction and existing homes. Use the search box and/or the filters to explore hundreds of residential building resources. Access to some references not produced by Building America may require purchase from the publisher. Documents are listed alphabetically. While we continually update our database, links may have changed since posting. Please contact our webmaster if you find broken links.

Author(s): Puttagunta
Organization(s): CARB, Steven Winter Associates, SWA
Publication Date: August, 2009

Information sheet about proper ventilation and air sealing.

Author(s): Building Science Corporation
Organization(s): Building Science Corporation
Publication Date: May, 2009

Information sheet about transfer ducts and grilles.

Author(s): Burdick
Organization(s): IBACOS
Publication Date: June, 2013

This Strategy Guideline covers the pros and cons of compact air distribution systems and the decision criteria that must be considered early in the whole-house design process. 

Author(s): Burdick
Organization(s): IBACOS, National Renewable Energy Laboratory
Publication Date: June, 2011

Report about the impact on the loads when common safety factors are applied to the load calculation process using two houses that meet the 2009 IECC prescriptive path modeled as the accurate baseline.

Author(s): Choi, Ludwig, Brand
Organization(s): PARR, National Renewable Energy Laboratory, Gas Technology Institute, CNT Energy
Publication Date: August, 2012

Report addressing barriers to information, contractor resources and cost savings associated with steam balancing multifamily buildings.

Author(s): Shapiro, Aldrich, Arena
Organization(s): CARB, National Renewable Energy Laboratory, Steven Winter Associates, SWA
Publication Date: July, 2012

Report describing procedures for increasing sensible efficiencies through increased flow rates across the air handling unit and increased indoor coil sizes.

Author(s): Department of Energy
Organization(s): DOE
Publication Date: August, 2010

Presentation providing information about correctly installing ductwork in new and existing homes.

Author(s): Moyer, Stroer, Hoak, McIlvaine, Chandra
Organization(s): FSEC
Publication Date: December, 2008

Document presenting results from testing HVAC duct system design incorporating a high-side supply register.

Author(s): Shapiro, Magee, Zoeller
Organization(s): CARB, Steven Winter Associates, SWA
Publication Date: February, 2013

Report including an overview of the buried duct research and information the retrofit methodology used to install and test the three existing duct systems, including short- and long-term data collection.

Author(s): Arena, Faakye
Organization(s): CARB, Steven Winter Associates, SWA
Publication Date: October, 2013

Research study using modeling to determine optimal combination(s) of components/pumps, high efficiency heat sources, plumbing configurations and controls that result in the highest overall efficiency for a hydronic system.

Author(s): Chasar, Withers
Organization(s): BA-PIRC, Florida Solar Energy Center, FSEC
Publication Date: February, 2013

Research study analyzing measured energy savings from a moderate retrofit by comparing post-retrofit performance with measured pre-retrofit monitored data.

Author(s): Beal, McIlvaine, Fonorow, Martin
Organization(s): BA-PIRC, National Renewable Energy Laboratory, Florida Solar Energy Center, FSEC
Publication Date: November, 2011

Document illustrating guidelines for efficient installation of interior duct systems in new housing.

Author(s): Aldrich, Puttagunta
Organization(s): CARB, National Renewable Energy Laboratory, Steven Winter Associates, SWA
Publication Date: December, 2011

Report descibing the sealing and insulating of HVAC duct systems in new and existing homes.

Author(s): Arena
Organization(s): CARB, Steven Winter Associates, SWA
Publication Date: May, 2013

Document intended for designers and installers of hydronic heating systems interested in maximizing the overall system efficiency of condensing boilers when coupled with baseboard convectors. It is applicable to new and retrofit projects.

Author(s): Rudd
Organization(s): Building Science Corporation, National Renewable Energy Laboratory
Publication Date: August, 2012

Document pertaining to design and application guidance for combination space and tankless domestic hot water heating systems used in residential buildings, based on field evaluation, testing, and industry meetings.

Author(s): Shapiro, Zoeller, Mantha
Organization(s): CARB, Steven Winter Associates, SWA
Publication Date: August, 2013

Document covering the technical aspects of buried and insulated ducts (BEDs), as well as the advantages, disadvantages, and risks of BEDs compared to alternative strategies.

Author(s): Fonorow, Jenkins, Thomas-Rees, Chandra
Organization(s): FSEC
Publication Date: October, 2010
Document presenting a cost effective method that was used by four builders in the Gainesville, FL area to construct interior ducts in over a dozen site built homes.
Author(s): Ueno, Loomis
Organization(s): Building Science Corporation

Report on the long-term performance of mini-split heat pumps.

Author(s): Winkler
Organization(s): National Renewable Energy Laboratory
Publication Date: September, 2011

Report proposing mini-split heat pumps as a new retrofit option to replace resistance heating in the Pacific Northwest.

Author(s): Dentz, Henderson
Organization(s): ARIES, Levy Partnership
Publication Date: April, 2012

Report evaluating the relative effectiveness of various control and distribution strategies to improve hydronic space heating performance in existing low-rise multifamily buildings

Author(s): Arena
Organization(s): CARB, National Renewable Energy Laboratory, Steven Winter Associates, SWA
Publication Date: January, 2013

Expert meeting held to review and discuss results and future plans for research to improve the performance of hydronic heating systems using condensing boilers and baseboard convectors.

Author(s): Cummings, Withers
Organization(s): BA-PIRC, Florida Solar Energy Center, FSEC
Publication Date: December, 2011

Research study describing experiments run in an unoccupied 1600 ft2 house to evaluate the delivered performance as well as the relative performance of a SEER 21 variable capacity heat pump versus a SEER 13 heat pump.

Author(s): Vieira, Parker, Gu, Wichers
Organization(s): FSEC
Publication Date: January, 2009
Document comparing simulation results from a modified version of the EnergyGauge program to include various HVAC runtime strategies.
Author(s): Building Science Corporation
Organization(s): Building Science Corporation
Publication Date: May, 2009

Brochure with information about ducts in conditioned space.

Author(s): Building Science Corporation
Organization(s): Building Science Corporation
Publication Date: May, 2009

Brochure with details on HVAC duct air sealing.

Author(s): Burdick
Organization(s): IBACOS
Publication Date: December, 2014
Report outlining the issues with using existing ducts with a new low-load HVAC system, which reduces throw at supply registers causing decreased mixing of supply and room air, leading to potential thermal comfort complaints.
Author(s): Cummings, Withers, Kono
Organization(s): BA-PIRC, Florida Solar Energy Center, FSEC

Report on variable-capacity air conditioning and heat pump units.

Author(s): Gilbride, Baechler, Hefty, Hand, Love
Organization(s): Pacific Northwest National Laboratory, Oak Ridge National Laboratory
Publication Date: August, 2011

Report providing information about energy-efficient heating, ventilation, and cooling (HVAC) equipment options to help homeowners cut their energy use, reduce their carbon footprint, and increase their homes comfort, health, and safety.

Author(s): National Renewable Energy Laboratory
Organization(s): National Renewable Energy Laboratory
Publication Date: November, 2004

Brochure intended to provide readers with a working knowledge of residential heating and cooling duct systems.

Author(s): Dentz, Conlin, Holloway, Podorson, Varshney
Organization(s): ARIES, Levy Partnership
Publication Date: March, 2014

In multifamily and attached buildings, traditional duct sealing methods are often impractical or costly and disruptive because of the difficulty in accessing leakage sites. In this project, two retrofit duct sealing techniques - manually-applied sealants and injecting a spray sealant, were implemented in several low-rise multi-unit buildings....

Author(s): Beach, Dickson, Grisolia, Poerschke, Rapport
Organization(s): IBACOS
Publication Date: August, 2017

This report describes an air distribution system composed of a series of uniformly-sized ducts that terminate in rooms throughout the home and return to a central manifold, similar in fashion to a “home-run” cross-linked polyethylene plumbing system. With a well-designed manifold, each duct receives an equal static pressure...

Author(s): Springer, Dakin, Backman
Organization(s): ARBI, National Renewable Energy Laboratory, Davis Energy Group
Publication Date: July, 2012

Research study estimating potential energy savings relative to conventional ducted air distribution, and identifying equipment requirements, costs, and barriers.