Log in or register to create Field Kits and Sales Worksheets. Why register?

Library

This library contains research reports produced by the Building America program and other building science resources used to support this Solution Center. The materials cover both new construction and existing homes. Use the search box and/or the filters to explore hundreds of residential building resources. Access to some references not produced by Building America may require purchase from the publisher. Documents are listed alphabetically. While we continually update our database, links may have changed since posting. Please contact our webmaster if you find broken links.

Author(s): Puttagunta
Organization(s): CARB, Steven Winter Associates, SWA
Publication Date: August, 2009

Information sheet about proper ventilation and air sealing.

Author(s): Building Science Corporation
Organization(s): Building Science Corporation
Publication Date: May, 2009

Information sheet about transfer ducts and grilles.

Author(s): Ridouane
Organization(s): National Renewable Energy Laboratory
Publication Date: January, 2012

Document about development of recommendations to help residential HVAC designers select optimal supply inlet size and system operating conditions to maintain good thermal comfort in low heating and cooling load homes.

Author(s): Burdick
Organization(s): IBACOS
Publication Date: June, 2013
Document covering the pros and cons of compact air distribution systems and the decision criteria that must be considered early in the whole-house design process.
Author(s): Burdick
Organization(s): IBACOS
Publication Date: June, 2013

This Strategy Guideline covers the pros and cons of compact air distribution systems and the decision criteria that must be considered early in the whole-house design process. 

Author(s): Burdick
Organization(s): IBACOS, National Renewable Energy Laboratory
Publication Date: June, 2011

Report about the impact on the loads when common safety factors are applied to the load calculation process using two houses that meet the 2009 IECC prescriptive path modeled as the accurate baseline.

Author(s): Zoeller
Organization(s): CARB, Steven Winter Associates, SWA
Publication Date: March, 2009

Information sheet about buried ducts.

Author(s): U.S. Environmental Protection Agency
Organization(s): EPA
Publication Date: November, 2012

Website with consumer information about duct cleaning.

Author(s): Russell, Sherman, Rudd
Organization(s): Lawrence Berkeley National Laboratory
Publication Date: August, 2005

Document reviewing current and potential ventilation technologies for residential buildings with particular emphasis on North American climates and construction.

Author(s): Wei
Organization(s): TRC Energy Services
Publication Date: October, 2014
Report proposes high performance duct measures for inclusion in California Title 24 building energy efficiency standards for 2016.
Author(s): Department of Energy
Organization(s): DOE
Publication Date: August, 2010

Presentation providing information about correctly installing ductwork in new and existing homes.

Author(s): Moyer, Stroer, Hoak, McIlvaine, Chandra
Organization(s): FSEC
Publication Date: December, 2008

Document presenting results from testing HVAC duct system design incorporating a high-side supply register.

Author(s): ACTO Rubber Products Inc., Air Diffusion Council
Organization(s): Air Diffusion Council
Publication Date: March, 2011
Presentation about proper installation of flexible ducts.
Author(s): Arena, Faakye
Organization(s): CARB, Steven Winter Associates, SWA
Publication Date: October, 2013

Research study using modeling to determine optimal combination(s) of components/pumps, high efficiency heat sources, plumbing configurations and controls that result in the highest overall efficiency for a hydronic system.

Author(s): ASHRAE
Organization(s): ASHRAE
Publication Date: June, 2014
Describes methods for testing duct systems to determine their performance under standard conditions.
Author(s): Beal, McIlvaine, Fonorow, Martin
Organization(s): BA-PIRC, National Renewable Energy Laboratory, Florida Solar Energy Center, FSEC
Publication Date: November, 2011

Document illustrating guidelines for efficient installation of interior duct systems in new housing.

Author(s): Beach, Burdick
Organization(s): IBACOS
Publication Date: March, 2014

Report describing recommendations for optimizing flexible duct, constant-volume HVAC systems using junction boxes. 

Author(s): Burdick
Organization(s): IBACOS
Publication Date: October, 2013
Report providing guidance on how to implement a compact duct system inside a plenum truss bulkhead of a one-story, slab-on-grade home.
Author(s): Arena
Organization(s): CARB, Steven Winter Associates, SWA
Publication Date: May, 2013

Document intended for designers and installers of hydronic heating systems interested in maximizing the overall system efficiency of condensing boilers when coupled with baseboard convectors. It is applicable to new and retrofit projects.

Author(s): Rudd
Organization(s): Building Science Corporation, National Renewable Energy Laboratory
Publication Date: August, 2012

Document pertaining to design and application guidance for combination space and tankless domestic hot water heating systems used in residential buildings, based on field evaluation, testing, and industry meetings.

Author(s): Shapiro, Zoeller, Mantha
Organization(s): CARB, Steven Winter Associates, SWA
Publication Date: August, 2013

Document covering the technical aspects of buried and insulated ducts (BEDs), as well as the advantages, disadvantages, and risks of BEDs compared to alternative strategies.

Author(s): Fonorow, Jenkins, Thomas-Rees, Chandra
Organization(s): FSEC
Publication Date: October, 2010
Document presenting a cost effective method that was used by four builders in the Gainesville, FL area to construct interior ducts in over a dozen site built homes.
Author(s): Ueno, Loomis
Organization(s): Building Science Corporation

Report on the long-term performance of mini-split heat pumps.

Author(s): Moyer, Stroer
Organization(s): FSEC
Publication Date: December, 2007
Report summarizing approaches to addressing duct leakage in hot humid climates.
Author(s): Dentz, Henderson
Organization(s): ARIES, Levy Partnership
Publication Date: April, 2012

Report evaluating the relative effectiveness of various control and distribution strategies to improve hydronic space heating performance in existing low-rise multifamily buildings

Author(s): Air Diffusion Council
Organization(s): Air Diffusion Council
Publication Date: January, 2010
Standard providing a comprehensive approach to evaluating, selecting, specifying and installing flexible duct in HVAC systems.
Author(s): Johns Manville
Organization(s): Johns Manville
Publication Date: January, 2008
Information sheet providing detail about hand fabrication of a one-piece straight duct from a 48" x 120" x 1" thick (1.22 m x 3.05 m x 25 mm) sheet where the total inside duct dimensions equals 112" (2.84 m) or less.
Author(s): Arena
Organization(s): CARB, National Renewable Energy Laboratory, Steven Winter Associates, SWA
Publication Date: January, 2013

Expert meeting held to review and discuss results and future plans for research to improve the performance of hydronic heating systems using condensing boilers and baseboard convectors.

Author(s): U.S. Environmental Protection Agency
Organization(s): EPA
Publication Date: November, 2015

This report is designed to meet ASHRAE 62.2-2010/2013 and ANSI/ACCA’s 5 QI-2015 protocol, thereby improving the performance of HVAC equipment in new homes when compared to homes built to minimum code.

Author(s): Cummings, Withers
Organization(s): BA-PIRC, Florida Solar Energy Center, FSEC
Publication Date: December, 2011

Research study describing experiments run in an unoccupied 1600 ft2 house to evaluate the delivered performance as well as the relative performance of a SEER 21 variable capacity heat pump versus a SEER 13 heat pump.

Author(s): Vieira, Parker, Gu, Wichers
Organization(s): FSEC
Publication Date: January, 2009
Document comparing simulation results from a modified version of the EnergyGauge program to include various HVAC runtime strategies.
Author(s): Building Science Corporation
Organization(s): Building Science Corporation
Publication Date: May, 2009

Brochure with information about ducts in conditioned space.

Author(s): Building Science Corporation
Organization(s): Building Science Corporation
Publication Date: May, 2009

Brochure with details on HVAC duct air sealing.

Author(s): North American Insulation Manufacturers Association
Organization(s): North American Insulation Manufacturers Association
Publication Date: January, 2010
Information sheet with HVAC duct insulation, testing, maintenance and performance information.
Author(s): McIlvaine, Beal, Fairey
Organization(s): FSEC
Publication Date: October, 2014
This study focuses on the design, construction, and performance of the interior chase approach as implemented by five different builders in Texas, North Carolina, and Florida
Author(s): Cummings, Withers, Kono
Organization(s): BA-PIRC, Florida Solar Energy Center, FSEC

Report on variable-capacity air conditioning and heat pump units.

Author(s): Burdick
Organization(s): IBACOS
Publication Date: October, 2013
Report summarizing one year of monitoring and analysis of a space conditioning system at maintaining temperature and relative humidity levels in a test home.
Author(s): National Air Duct Cleaners Association
Organization(s): National Air Duct Cleaners Association
Publication Date: January, 2013
Manual showing duct cleaning contractors how to identify the different types of insulated air ducts, how to open each type for access by cleaning equipment and personnel, how to close and seal openings after cleaning.
Author(s): Sullivan
Organization(s): Earth Advantage Institute, Northwest Energy Efficiency Alliance
Publication Date: June, 2011
Training manual on how to locate ducts within conditioned space and compact design.
Author(s): Gilbride, Baechler, Hefty, Hand, Love
Organization(s): Pacific Northwest National Laboratory, Oak Ridge National Laboratory
Publication Date: August, 2011

Report providing information about energy-efficient heating, ventilation, and cooling (HVAC) equipment options to help homeowners cut their energy use, reduce their carbon footprint, and increase their homes comfort, health, and safety.

Author(s): National Renewable Energy Laboratory
Organization(s): National Renewable Energy Laboratory
Publication Date: November, 2004

Brochure intended to provide readers with a working knowledge of residential heating and cooling duct systems.

Author(s): RESNET
Organization(s): International Code Council
Publication Date: February, 2016

This Standard provides a consistent, uniform methodology for evaluating the airtightness of building envelopes and heating and cooling air ducts and the air flows of mechanical ventilation systems.

Author(s): Burdick
Organization(s): IBACOS, National Renewable Energy Laboratory
Publication Date: December, 2011

Document providing guideance and considerations for duct design in an energy efficient house.

Author(s): Air Diffusion Council
Organization(s): Air Diffusion Council
Publication Date: January, 2013
Standard that sets forth the specific methods of testing flexible air ducts used for indoor comfort heating, ventilating and air conditioning applications.
Author(s): Air Diffusion Council
Organization(s): Air Diffusion Council
Publication Date: January, 2013
Standard for use and reference by designers, architects, engineers, contractors, installers and users for evaluating, selecting, specifying and properly installing flexible duct in heating and air conditioning systems.
Author(s): National Air Duct Cleaners Association
Organization(s): National Air Duct Cleaners Association
Publication Date: January, 2013
Standard providing industry-backed information for assessing new and existing HVAC systems, evaluating and verifying the cleanliness of HVAC system components, preventing job related hazards and guiding the cleaning and restoration of HVAC systems to a specific level of cleanliness.
Author(s): Air Conditioning Contractors of America
Organization(s): Air Conditioning Contractors of America
Publication Date: May, 2018

Technical manual from ACCA outlining correct methods for residential zoning.

Author(s): Air Conditioning Contractors of America
Organization(s): Air Conditioning Contractors of America
Publication Date: June, 2009

Standard providing guidance on how to select, size, and locate the supply air diffusers, grilles and registers, and the return grilles.

Author(s): Air Conditioning Contractors of America
Organization(s): Air Conditioning Contractors of America
Publication Date: December, 2013
Standard outlining industry procedure for sizing residential duct systems.
Author(s): Beach, Dickson, Grisolia, Poerschke, Rapport
Organization(s): IBACOS
Publication Date: August, 2017

This report describes an air distribution system composed of a series of uniformly-sized ducts that terminate in rooms throughout the home and return to a central manifold, similar in fashion to a “home-run” cross-linked polyethylene plumbing system. With a well-designed manifold, each duct receives an equal static pressure...

Pages