Skip to main content

Library

This library contains research reports produced by the Building America program and other building science resources used to support this Solution Center. The materials cover both new construction and existing homes. Use the search box and/or the filters to explore hundreds of residential building resources. Access to some references not produced by Building America may require purchase from the publisher. Documents are listed alphabetically. While we continually update our database, links may have changed since posting. Please contact our webmaster if you find broken links.

Showing results 1 - 50 of 69

Author(s)
International Code Council
Organization(s)
ICC
Publication Date
Description
2018 edition of code establishing a baseline for existing building retrofits to reach appropriate safety levels under new construction requirements covered in other ICC codes.
Author(s)
ABTCO Vinyl Siding
Organization(s)
ABTCO Vinyl Siding
Publication Date
Description
Vinyl siding estimating and installation guide for vinyl siding products.
Author(s)
APA - The Engineered Wood Association
Organization(s)
APA
Publication Date
Description
Detailed guide to advanced framing, a system of construction framing techniques designed to optimize material usage and increase energy efficiency.
Author(s)
Bohac Dave,
Harrington Curtis
Organization(s)
EERE,
USDOE Office of Energy Efficiency and Renewable Energy,
Center for Energy and Environment
Publication Date
Description
Technical report describing the research behind a new aerosol-based sealing method, utilizing pressurization and a dispersed sealant fog, facilitated by a standard blower door, to automatically measure, locate, and seal air leaks in new homes in the United States, providing an efficient solution to...
Author(s)
NREL
Organization(s)
NREL,
USDOE Office of Energy Efficiency and Renewable Energy
Publication Date
Description
Fact sheet outlining an innovative aerosol-based sealing technique for tightening building envelopes in new homes, involving pressurizing the structure and dispersing an aerosol sealant "fog" to autonomously identify and seal leaks, with real-time feedback through a standard blower door and laptop...
Author(s)
American Society for Testing and Materials,
ASTM International
Organization(s)
ASTM
Publication Date
Description
These test methods describe two techniques for measuring air leakage rates through a building envelope in buildings that may be configured to a single zone. This standard was published in the year 2022 and is available for preview and purchase at the reference link. Other versions of the standard...
Author(s)
American Society for Testing and Materials,
ASTM International
Organization(s)
ASTM
Publication Date
Description
Standard that details a test method measuring air-leakage rates through a building envelope under controlled pressurization and de-pressurization. This version of the standard was published in the year 2019 and is available for preview and purchase at the reference link. Other versions of the...
Author(s)
Hammer & Hand
Organization(s)
Hammer & Hand
Publication Date
Description
This Best Practices Manual is the product of Hammer & Hand’s ongoing work to document and internally codify our standard operating procedures for construction practice.
Author(s)
Lstiburek
Organization(s)
Building Science Corporation
Publication Date
Description
The Builder's Guide provides the building industry with the latest and best practical information on how to apply building science principles to structures as systems in hot-humid climate regions.
Author(s)
Baechler Michael C,
Gilbride Theresa L,
Hefty Marye G,
Cole Pam C,
Adams Karen T,
Noonan Chrissy F,
Love Pat M
Organization(s)
Pacific Northwest National Laboratory,
PNNL,
Oak Ridge National Laboratory,
ORNL
Publication Date
Description
A guidebook helping builders design and construct homes that are among the most energy efficient available, while addressing issues such as building durability, indoor air quality, and occupant health, safety, and comfort. Measures described in this guide can help builders in the hot-humid climate...
Author(s)
Green Building Advisor
Organization(s)
Green Building Advisor
Publication Date
Description
Website providing CAD files and drawings of advanced framing details.
Author(s)
Building Science Corporation
Organization(s)
BSC
Publication Date
Description
Information sheet with details on a building enclosure designed for Albuquerque, NM, as an example for building enclosures built for hot-dry and mixed-dry climates.
Author(s)
Matthew J. Nahlik,
Mikhail V. Chester,
Stephanie S. Pincetl,
David Eisenman,
Deepak Sivaraman,
Paul English
Organization(s)
ASCE
Publication Date
Description
Article published by American Society of Civil Engineers on different building types and their effictiveness resisting extreme heat from a building envelope perspective.
Author(s)
Baker Peter,
Eng P,
Lepage R
Organization(s)
Building Science Corporation,
BSC
Publication Date
Description
Report on the stability of furring strips as a means for cladding attachment over walls with thick exterior rigid insulation.
Author(s)
Kosny,
Fallahi,
Shukla
Organization(s)
Fraunhofer CSE,
National Renewable Energy Laboratory
Publication Date
Description
Research study investigating the energy performance and cost effectiveness of several state-of-the-art retrofit strategies that could be used in residential houses in the Boston and New England area.
Author(s)
Kochkin,
Wiehagen
Organization(s)
Home Innovation Research Labs
Publication Date
Description
Part I of the Guide addresses walls constructed with 2x6 wood frame studs, wood structural panel (WSP) sheathing as exterior sheathing, gypsum board as interior sheathing, and a cladding system installed over WSP sheathing in low-rise residential buildings up to three stories in height. The Guide is...
Author(s)
Kochkin,
Wiehagen
Organization(s)
Home Innovation Research Labs
Publication Date
Description
The Guide addresses walls constructed with 2x4 wood frame studs, wood structural panel sheathing (WSP) as wall bracing and added backing for foam sheathing, a layer of rigid foam sheathing insulation up to 1.5 inches thick over the WSP, and a cladding system installed over the foam sheathing in low...
Author(s)
Kochkin,
Wiehagen
Organization(s)
Home Innovation Research Labs
Publication Date
Description
Part I of the Guide addresses walls constructed with 2x6 wood frame studs, wood structural panel (WSP) sheathing as exterior sheathing, gypsum board as interior sheathing, and a cladding system installed over WSP sheathing in low-rise residential buildings up to three stories in height. Walls with...
Organization(s)
Construction Instruction
Publication Date
Description
Website providing building science based guidance for residential construction.
Author(s)
Straube
Organization(s)
Building Science Corporation
Publication Date
Description
Article describing research encouraging use of exterior insulation to warm interior sheathing surfaces in walls and roof assemblies to reduce the likelihood of condensation during cold weather
Author(s)
Aldrich Robb,
Williamson Jim
Organization(s)
Consortium for Advanced Residential Buildings,
CARB,
Steven Winter Associates,
SWA
Publication Date
Description
Research report anayzing the results of a large retrofit project, turining an old school into near zero energy consumption apartments in Greenfield MA.
Author(s)
Lstiburek
Organization(s)
Building Science Corporation,
BSC
Publication Date
Description
Article describing strategies for reducing the risk of ice dam formation on roofs in winter.
Author(s)
Drumheller S Craig,
Carll Charles G
Organization(s)
NAHB Research Center,
Home Innovation Research Labs,
Forest Products Laboratory,
FPL,
U.S. Department of Agriculture Forest Service,
USDA Forest Service
Publication Date
Description
The objective of this research was to quantify the field performance of wood-frame walls clad with a variety of common claddings in a mixed-humid climate.
Author(s)
Lstiburek
Organization(s)
Building Science Corporation,
BSC
Publication Date
Description
Report on problems and solutions with EIFS stucco wall cladding systems.
Author(s)
Energy Saver
Organization(s)
U.S. Department of Energy
Publication Date
Description
Web page providing an overview of window coverings such as blinds, shades, shutters, films, and storm windows.
Author(s)
U.S. Department of Energy
Organization(s)
DOE
Publication Date
Description
Website from the U.S. Department of Energy providing consumers with information on saving energy and using renewable energy technologies.
Author(s)
Home Innovation Research Labs
Organization(s)
Home Innovation Research Labs,
DOE
Publication Date
Description
Report that demonstrates the durability, constructability, and cost-effectiveness of the extended plate and beam (EP&B) wall system for new construction housing projects in compliance with the International Energy Conservation Code, addressing moisture risk management and high-performance envelope...
Author(s)
Burkett,
Lena; Gunderson,
Patti
Organization(s)
NREL,
USDOE Office of Energy Efficiency and Renewable Energy
Publication Date
Description
Fact sheet describing the Extended Plate Wall (EPW) a system that incorporates a 2-inch layer of foam plastic insulative sheathing within the framing for top and bottom plates, streamlining air sealing, window and door installation, weather resistive barrier application, and cladding attachment for...
Author(s)
Kapur,
Mahadevia,
Park,
Passman,
Perotin,
Reeder,
Seitz,
Sheldon,
Tezak
Organization(s)
FEMA
Publication Date
Description
Report providing guidance on how to improve the wind resistance of existing residential buildings in Mississippi and across the Gulf Coast.
Author(s)
Levy E,
Dentz Jordan,
Ansanelli Eric,
Barker G,
Rath P,
Dadia D
Organization(s)
Advanced Residential Integrated Energy Solutions Collaborative,
ARIES
Publication Date
Description
Report on the field evaluation of whole-building approaches and estimation of the relative contributions of select technologies toward reducing energy use related to space conditioning in new manufactured homes.
Author(s)
Lstiburek
Organization(s)
BSC,
Building Science Corporation
Publication Date
Description
Article describing five fundamental changes to building construction from the last 50 years and their modern construction consequences.
Author(s)
Parker Danny S,
Kono Jamie E,
Vieira Robin K,
Fairey Philip W,
Sherwin John S,
Withers Charles,
Hoak David,
Beal David
Organization(s)
Building America Partnership for Improved Residential Construction,
BA-PIRC,
National Renewable Energy Laboratory,
NREL,
Florida Solar Energy Center,
FSEC
Publication Date
Description
Research report assessing the moisture and cooling load impacts of airtightness and mechanical ventilation in homes in hot-humid climates.
Author(s)
Smith,
Renfroe
Organization(s)
NIBS
Publication Date
Description
Article describing the fundamentals and basics of glazing hazard mitigation practices for both new and existing buildings.
Author(s)
Diez
Organization(s)
New Home Source
Publication Date
Description
Article summarizing for potential homeowners items to check or demand from the builder in designing a home for a cold climate.
Author(s)
Straube
Organization(s)
Building Science Corporation,
BSC
Publication Date
Description
Article outlining the casuses and solutions for ice dam problems.
Author(s)
Pettit,
Neuhauser,
Gates
Organization(s)
Building Science Corporation,
BSC
Publication Date
Description
Guidebook providing useful examples of high performance retrofit techniques for the building enclosure of wood frame residential construction in a cold and somewhat wet climate.
Author(s)
Ply Gem Siding Group
Organization(s)
Ply Gem Siding Group
Publication Date
Description
Siding installation guide for Ply Gem Siding Group products.
Author(s)
Joseph Lstiburek
Organization(s)
Building Science Corporation,
BSC,
U.S. Department of Energy,
DOE
Publication Date
Description
Report providing extensive guidance on controlling moisture in building envelopes through proper selection and installation on air, water, thermal, and vapor barriers.