Skip to main content

Library

This library contains research reports produced by the Building America program and other building science resources used to support this Solution Center. The materials cover both new construction and existing homes. Use the search box and/or the filters to explore hundreds of residential building resources. Access to some references not produced by Building America may require purchase from the publisher. Documents are listed alphabetically. While we continually update our database, links may have changed since posting. Please contact our webmaster if you find broken links.

Showing results 1 - 50 of 50

Author(s)
Crandell Jay H
Organization(s)
Structural Building Components Association,
SBCA
Publication Date
Description
Article describing vapor retarder requirements in the International Residential Code and International Building Code 2021.
Author(s)
Lstiburek
Organization(s)
Building Science Corporation,
BSC
Publication Date
Description
Article describing methods for venting a vented attic and a roof assembly over an unvented attic.
Author(s)
ABTCO Vinyl Siding
Organization(s)
ABTCO Vinyl Siding
Publication Date
Description
Vinyl siding estimating and installation guide for vinyl siding products.
Author(s)
Gilbride Theresa
Organization(s)
Pacific Northwest National Laboratory,
PNNL
Publication Date
Description
Fact sheet poster describing how to add exterior, continuous, rigid insulation to the exterior walls when replacing siding on an existing home.
Author(s)
Holladay
Organization(s)
Green Building Advisor
Publication Date
Description
Article about different types of weather resistant barrier.
Author(s)
Federal Emergency Management Agency
Organization(s)
FEMA
Publication Date
Description
Technical fact sheet describing ways to construct asphalt shingle roofs to be more resistant to high winds and hurricanes; also published in FEMA P-499 “Home Builder’s Guide to Coastal Construction: Technical Fact Sheet Series.”
Author(s)
Hammer & Hand
Organization(s)
Hammer & Hand
Publication Date
Description
This Best Practices Manual is the product of Hammer & Hand’s ongoing work to document and internally codify our standard operating procedures for construction practice.
Author(s)
Oak Ridge National Laboratory,
U.S. Department of Energy
Organization(s)
ORNL,
DOE
Publication Date
Description
Web based tool providing decision-making guidance for selecting wall assembly components.
Author(s)
Lstiburek
Organization(s)
Building Science Corporation,
BSC
Publication Date
Description
Article describing the control layers (air, thermal, and vapor barriers) needed to build homes successfully in very cold locations.
Author(s)
Fisette
Organization(s)
University of Massachusetts
Publication Date
Description
Information sheet discussing how OSB will define the future of the structural sheathing market. OSB will define the future of the structural sheathing market. - See more at: http://bct.eco.umass.edu/publications/by-title/choosing-between-oriented-strandboard-and-plywood/#sthash.RilEtDpl.dpuf
Author(s)
Baker Peter,
Eng P,
Lepage R
Organization(s)
Building Science Corporation,
BSC
Publication Date
Description
Report on the stability of furring strips as a means for cladding attachment over walls with thick exterior rigid insulation.
Author(s)
Kochkin,
Wiehagen
Organization(s)
Home Innovation Research Labs
Publication Date
Description
Part I of the Guide addresses walls constructed with 2x6 wood frame studs, wood structural panel (WSP) sheathing as exterior sheathing, gypsum board as interior sheathing, and a cladding system installed over WSP sheathing in low-rise residential buildings up to three stories in height. The Guide is...
Author(s)
Kochkin,
Wiehagen
Organization(s)
Home Innovation Research Labs
Publication Date
Description
The Guide addresses walls constructed with 2x4 wood frame studs, wood structural panel (WSP) sheathing as wall bracing and added backing for foam sheathing, a layer of rigid foam sheathing insulation up to 1.5 in. thick over the WSP, and a cladding system installed over the foam sheathing in low...
Author(s)
Kochkin,
Wiehagen
Organization(s)
Home Innovation Research Labs
Publication Date
Description
The Guide addresses walls constructed with 2x4 wood frame studs, wood structural panel sheathing (WSP) as wall bracing and added backing for foam sheathing, a layer of rigid foam sheathing insulation up to 1.5 inches thick over the WSP, and a cladding system installed over the foam sheathing in low...
Author(s)
Kochkin,
Wiehagen
Organization(s)
Home Innovation Research Labs
Publication Date
Description
Part I of the Guide addresses walls constructed with 2x6 wood frame studs, wood structural panel (WSP) sheathing as exterior sheathing, gypsum board as interior sheathing, and a cladding system installed over WSP sheathing in low-rise residential buildings up to three stories in height. Walls with...
Author(s)
Drumheller S Craig,
Carll Charles G
Organization(s)
NAHB Research Center,
Home Innovation Research Labs,
Forest Products Laboratory,
FPL,
U.S. Department of Agriculture Forest Service,
USDA Forest Service
Publication Date
Description
The objective of this research was to quantify the field performance of wood-frame walls clad with a variety of common claddings in a mixed-humid climate.
Author(s)
Lstiburek
Organization(s)
Building Science Corporation,
BSC
Publication Date
Description
Report on problems and solutions with EIFS stucco wall cladding systems.
Author(s)
Louisiana State University College of Agriculture
Organization(s)
LSU AgCenter
Publication Date
Description
Webpage from LSU AgCenter answering frequently asked questions after gutting a flooded home, including mitigation strategies for future floods.
Author(s)
Holladay
Organization(s)
Green Building Advisor
Publication Date
Description
Information sheet about what length screws should be used, and how closely to space the screws when fastening furring strips to a foam-sheathed wall.
Author(s)
Louisiana Office of State Fire Marshall
Organization(s)
Louisiana Office of State Fire Marshall
Publication Date
Description
Site showing flame spread ratings and definitions for common building materials.
Author(s)
Insurance Institute for Business & Home Safety
Organization(s)
IBHS
Publication Date
Description
Checklist highlighting key concepts of wind design uplift pressures and design uplift pressure ratings for proper selection and installation of residential roof covering systems to comply with section R905.1 of the 2015 International Residential Code for a FORTIFIED Roof™–New Roof designation.
Author(s)
Insurance Institute for Business & Home Safety
Organization(s)
IBHS
Publication Date
Description
Checklist providing selection and installation guidance for residential, non-structural metal roof systems installed over wood roof decks with a roof slope 2:12 or greater to comply with section R905.1 of the 2015 IRC for a FORTIFIED Roof – New Roof Designation.
Author(s)
IBHS Fortified Home
Organization(s)
IBHS Fortified Home
Publication Date
Description
Website offering an online training that teaches disaster-resistant best practices for roofers.
Author(s)
Ply Gem Siding Group
Organization(s)
Ply Gem Siding Group
Publication Date
Description
Siding installation guide for Ply Gem Siding Group products.
Author(s)
Lstiburek
Organization(s)
BSC
Publication Date
Description
Discussion of building sheathing.
Author(s)
Joseph Lstiburek
Organization(s)
Building Science Corporation,
BSC,
U.S. Department of Energy,
DOE
Publication Date
Description
Report providing extensive guidance on controlling moisture in building envelopes through proper selection and installation on air, water, thermal, and vapor barriers.
Author(s)
Fowler Mark,
Stanley Bryan,
Coats Darin
Organization(s)
Technical Services Information Bureau,
Walls & Ceilings
Publication Date
Description
Manual covering design, detailing, material selection and troubleshooting for plaster, IEFs, and drywall, with info on continuous insulation, air barriers, rain screens, fire and sound ratings, etc.
Author(s)
NAHB Research Center
Organization(s)
NAHB Research Center
Publication Date
Description
Document presenting step-by-step process for installing rigid insulating sheathing over wood studs or house wrap.
Author(s)
Federal Emergency Management Agency
Organization(s)
FEMA
Publication Date
Description
Fact sheet describing proper roof sheathing installation and illustrating fastening methods that will enhance the durability of a building in high-wind areas; also published in FEMA P-499 “Home Builder’s Guide to Coastal Construction: Technical Fact Sheet Series.”
Author(s)
Fenestration Manufacturers Association,
American Architectural Manufacturers Association,
Window & Door Manufacturers Association
Organization(s)
FMA,
AAMA,
WDMA
Publication Date
Description
Guide describing the installation of windows in walls that have foam plastic insulating; guide provides several methods for attaching, supporting, and flashing windows in walls with rigid foam sheathing. (Note: The link only goes to the table of contents for the guide, the full guide can be...
Author(s)
DeKorne
Organization(s)
DeKorne
Publication Date
Description
Information sheet describing correct application of stucco.
Author(s)
Lstiburek
Organization(s)
BSC,
Building Science Corporation
Publication Date
Description
Article describing the evolution of the IRC to permit class 3 vapor retarders (latex paint) in walls coupled with exterior continuous insulation to allow drying and reduce condensation risk.