Skip to main content

Library

This library contains research reports produced by the Building America program and other building science resources used to support this Solution Center. The materials cover both new construction and existing homes. Use the search box and/or the filters to explore hundreds of residential building resources. Access to some references not produced by Building America may require purchase from the publisher. Documents are listed alphabetically. While we continually update our database, links may have changed since posting. Please contact our webmaster if you find broken links.

Showing results 1 - 50 of 99

Author(s)
Hales David,
Eklund Ken,
Kunkle Rick,
Lubliner Michael,
Banks Adria
Organization(s)
Washington State University Extension Energy Program,
WSU Extension Energy Program,
Northwest Energy Efficiency Alliance,
NEEA
Publication Date
Description
Report describing the results of a field study of five different ventilation system types in 29 homes in the Pacific Northwest.
Author(s)
Polly Benjamin,
Gestwick Mike,
Bianchi Marcus V A,
Anderson Ren,
Horowitz Scott,
Christensen Craig,
Judkoff Ron
Organization(s)
National Renewable Energy Laboratory,
NREL
Publication Date
Description
Report describing an analysis method for determining optimal residential energy efficiency retrofit packages and applies the analysis method to a 1960s-era home in eight U.S. cities.
Author(s)
Beach Robert,
Dickson B,
Grisolia A,
Poerschke A,
Rapport A
Organization(s)
IBACOS
Publication Date
Description
This report describes an air distribution system composed of a series of uniformly-sized ducts that terminate in rooms throughout the home and return to a central manifold, similar in fashion to a “home-run” cross-linked polyethylene plumbing system. With a well-designed manifold, each duct receives...
Author(s)
Air Duct Council
Organization(s)
ADC
Publication Date
Description
Standard that sets forth the specific methods of testing flexible air ducts used for indoor comfort heating, ventilating and air conditioning applications.
Author(s)
Schirber Tom,
Jacobson Rolf,
Handeen Dan,
Mosiman Garrett,
Huelman Patrick
Organization(s)
University of Minnesota,
USDOE Office of Energy Efficiency and Renewable Energy
Publication Date
Description
Technical report describing the SPS (Structural Panel System), an innovative implementation of the "perfect wall" concept, situating environmental control layers on the exterior side of structural components for improved constructability, cost-effectiveness, and performance, validated through the...
Author(s)
Dentz Jordan,
Conlin Francis,
Holloway Parker,
Podorson David,
Varshney Kapil
Organization(s)
Advanced Residential Integrated Energy Solutions Collaborative,
ARIES,
Levy Partnership
Publication Date
Description
Report describing two retrofit duct sealing techniques - manually-applied sealants and injecting a spray sealant, that were implemented in several low-rise multi-unit buildings in North Carolina.
Author(s)
Prahl Duncan,
Beach Robert
Organization(s)
IBACOS
Publication Date
Description
Report outlining workflow and results of regression models on monthly and daily utility data (meter readings of electricity consumption), outlining a process for screening and gathering useful results from inverse models.
Author(s)
American Society of Heating Refrigeration and Air-Conditioning Engineers
Organization(s)
ASHRAE,
American National Standards Institute,
ANSI
Publication Date
Description
Standard that prescribes a testing method to determine the efficiency of space heating and/or cooling thermal distribution systems under seasonal and design conditions. This version of the standard was published in the year 2014, and is available for preview and purchase at the reference link. The...
Author(s)
American Society for Testing and Materials,
ASTM International
Organization(s)
ASTM
Publication Date
Description
Standard that describes the principles for the design of a hot box apparatus and the minimum requirements for the determination of steady state thermal performance of building assemblies when exposed to controlled laboratory conditions. The current version of the standard was published in 2019, and...
Author(s)
American Society for Testing and Materials,
ASTM International
Organization(s)
ASTM
Publication Date
Description
Test method providing a rapid means of determining the steady-state thermal transmission properties of thermal insulations and other materials with a high level of accuracy when the apparatus has been calibrated appropriately. This version of the standard was published in the year 2021 and is...
Author(s)
American Society for Testing and Materials,
ASTM International
Organization(s)
ASTM
Publication Date
Description
These test methods describe two techniques for measuring air leakage rates through a building envelope in buildings that may be configured to a single zone. This standard was published in the year 2022 and is available for preview and purchase at the reference link. Other versions of the standard...
Author(s)
ASTM International
Organization(s)
ASTM
Publication Date
Description
Test method designed to calculate an assigned air permeance of flexible sheet or rigid panel-type materials at a reference air pressure differential of 75 Pa. This version of the standard was published in the year 2021 and is available for preview and purchase at the reference link. Other versions...
Author(s)
American Society for Testing and Materials,
ASTM International
Organization(s)
ASTM
Publication Date
Description
Standard that details a test method measuring air-leakage rates through a building envelope under controlled pressurization and de-pressurization. This version of the standard was published in the year 2019 and is available for preview and purchase at the reference link. Other versions of the...
Author(s)
American Society for Testing and Materials,
ASTM International
Organization(s)
ASTM
Publication Date
Description
ASTM standard test method for surface burning response of different building materials. This version of the standard was published in the year 2022 and is available for preview and purchase at the reference link. Other versions of the standard were published in the years 2023, 2021, 2020, 2019, 2018...
Author(s)
American Society for Testing and Materials,
ASTM International
Organization(s)
ASTM
Publication Date
Description
ASTM standard test method for testing the surface burning response of different building materials. This version of the standard was published in the year 2023 and is available for preview and purchase at the reference link. Other versions of the standard were published in the years 2022, 2021, 2020...
Author(s)
American Society for Testing and Materials,
ASTM International
Organization(s)
ASTM
Publication Date
Description
Test method designed to obtain reliable values for the WVTR of plastic film and sheeting. This version of the standard was published in the year 2020 and is available for preview and purchase at the reference link. Other versions of the standard were published in the years 2013, 2011, 2006, 2001...
Author(s)
Baechler Michael C,
Bartlett Rosemarie,
Gilbride Theresa L,
Love Pat M
Organization(s)
Pacific Northwest National Laboratory,
PNNL,
Oak Ridge National Laboratory,
ORNL
Publication Date
Description
Document providing guidance to U.S. home builders who want to accept the challenge.
Author(s)
Cal Fire Office of the State Fire Marshal
Organization(s)
Cal Fire,
CAL FIRE - OSFM
Publication Date
Description
California Office of the State Fire Marshal's homepage for the Building Materials Listing Program, providing builders, contractors, architects, and others with access to a database of fire alarm systems and fire-resistant construction materials including roof coverings, wall, ceiling, and floor...
Author(s)
Cal Fire Office of the State Fire Marshal
Organization(s)
Cal Fire,
CAL FIRE - OSFM
Publication Date
Description
California Office of the State Fire Marshal's compiled and searchable list of different building materials and their test results for fire resistance.
Author(s)
Building Performance Institute
Organization(s)
BPI
Publication Date
Description
Fact sheet that details the steps needed to perform a combustion appliance safety inspection to determine if fossil fuel-fired appliances are operating safely under a depressurized condition.
Author(s)
Cunningham Kerrie,
Hannigan Eileen
Organization(s)
NorthernSTAR Building America Partnership,
NorthernSTAR,
University of Minnesota,
UMN
Publication Date
Description
Research study comparing various retrofit models in Wisconsin to evaluate performance in terms of savings per home and program cost per home to assess the relative cost effectiveness of each program design.
Author(s)
Portland Cement Association
Organization(s)
Portland Cement Association
Publication Date
Description
Document discussing moisture considerations and testing techniques for concrete floors.
Author(s)
Cort Katherine A,
Culp Thomas D
Organization(s)
Pacific Northwest National Laboratory,
PNNL,
Birch Point Consulting,
BPC
Publication Date
Description
Research study evaluating energy savings and cost effectiveness of installing low-emissivity (low-e) storm windows over existing windows in residential homes in all climate zones.
Author(s)
Less,
Walker
Organization(s)
Lawrence Berkeley National Laboratory
Publication Date
Description
Part of a larger LBNL report (Deep Energy Retrofit Guidance for the Building America Solutions Center), the Design and Construction Process chapter provides detailed guidance for each process phase: pre-planning, planning, construction, test-out and post-occupancy.
Author(s)
Less,
Walker
Organization(s)
Lawrence Berkeley National Laboratory
Publication Date
Description
Part of a larger LBNL report (Deep Energy Retrofit Guidance for the Building America Solutions Center), the Occupant Behavior chapter discusses how to assess homeowner behavior patterns and use these patterns to enhance overall energy savings.
Author(s)
Less,
Walker
Organization(s)
Lawrence Berkeley National Laboratory
Publication Date
Description
Part of a larger LBNL report (Deep Energy Retrofit Guidance for the Building America Solutions Center), the Over Time, Phased Guidance chapter presents a phased approach to deep energy retrofits.
Author(s)
Wood
Organization(s)
NAHB Research Center,
National Renewable Energy Laboratory
Publication Date
Description
Report identifying business models for the remodeling industry that foster remodelers adoption of energy efficiency services.
Author(s)
Drumheller S Craig,
Carll Charles G
Organization(s)
NAHB Research Center,
Home Innovation Research Labs,
Forest Products Laboratory,
FPL,
U.S. Department of Agriculture Forest Service,
USDA Forest Service
Publication Date
Description
The objective of this research was to quantify the field performance of wood-frame walls clad with a variety of common claddings in a mixed-humid climate.
Author(s)
Zipperer Adam,
Aloise-Young Patricia A.,
Suryanarayanan Siddharth,
Roche Robin,
Earle Lieko,
Christensen Dane,
Bauleo Pablo,
Zimmerle Daniel
Organization(s)
Colorado State University,
CSU,
National Renewable Energy Laboratory,
NREL,
University of Technology of Belfort-Montbeliard,
UTBM,
Fort Collins Utilities
Publication Date
Description
Journal article presenting a discussion of the state-of-the- art in electricity management in smart homes, the various enabling technologies that will accelerate this concept, and topics around consumer behavior with respect to energy usage.
Author(s)
Desjarlais Andre,
Kosny Jan,
Christian Jeffrey E,
Petrie Thomas W,
Childs Phillip W,
Gawin D
Organization(s)
Oak Ridge National Laboratory,
ORNL,
Technical University of Lodz,
TUL
Publication Date
Description
Presentation about results from an insulating concrete form energy efficiency study in Knoxville, TN.
Author(s)
Burdick Arlan,
Poerschke A,
Rapport A
Organization(s)
IBACOS,
Wathen Castanos Hybrid Homes,
WCHH
Publication Date
Description
Report using a field test plan to evaluate the success of implementing energy efficiency upgrades at the community scale incorporating whole-house systems integrated measures package (SIMP).
Author(s)
McIlvaine,
Sutherland,
Martin
Organization(s)
BA-PIRC,
Florida Solar Energy Center,
FSEC
Publication Date
Description
Research study examining efficiency retrofit opportunities, typical renovation practices, and pathways for achieving U.S. Department of Energy (DOE) goals for existing homes in Florida.
Author(s)
U.S. Environmental Protection Agency
Organization(s)
EPA
Publication Date
Description
This report is designed to meet ASHRAE 62.2-2010/2013 and ANSI/ACCA’s 5 QI-2015 protocol, thereby improving the performance of HVAC equipment in new homes when compared to homes built to minimum code.
Author(s)
Martin Eric,
Withers Charles,
McIlvaine Janet E R,
Chasar Dave,
Beal David
Organization(s)
Building America Partnership for Improved Residential Construction,
BA-PIRC,
Florida Solar Energy Center,
FSEC
Publication Date
Description
This report evaluates the performance of variable-capacity comfort systems, with a focus on inverter-driven, variable-capacity systems, as well as proposed system enhancements.
Author(s)
Robertson Joseph,
Polly Ben,
Collis Jon
Organization(s)
National Renewable Energy Laboratory,
NREL,
Colorado School of Mines
Publication Date
Description
Research study simulation adapting and applies the general framework described in Building Energy Simulation Test for Existing Homes for self-testing residential building energy model calibration methods.
Author(s)
Yee S,
Milby M,
Baker J
Organization(s)
Partnership for Advanced Residential Retrofit,
PARR
Publication Date
Description
Study investigating homeowner measure package choices in the Illinois Home Performance with ENERGY STAR program compared to cost-optimal choices determined through Building Energy Optimization (BEopt) modeling software.
Author(s)
Cullin James R,
Xing Lu,
Lee Edwin,
Spitler Jeffrey D,
Fisher Daniel E
Organization(s)
American Society of Heating Refrigerating and Air-Conditioning Engineers,
ASHRAE,
Oklahoma State University,
OSU,
Oak Ridge National Laboratory,
ORNL
Publication Date
Description
Study characterizing how foundation heat exchangers (FHXs) used in residential ground source heat pump systems represent a potential cost savings due to their lesser first cost over other types of heat exchangers.
Author(s)
Edwards J,
Bohac D,
Nelson C,
Smith I
Organization(s)
NorthernSTAR Building America Partnership,
NorthernSTAR,
University of Minnesota
Publication Date
Description
Report describing a project focused on the use of home energy ratings as a tool to promote energy retrofits in existing homes.
Author(s)
Levy E,
Dentz Jordan,
Ansanelli Eric,
Barker G,
Rath P,
Dadia D
Organization(s)
Advanced Residential Integrated Energy Solutions Collaborative,
ARIES
Publication Date
Description
Report on the field evaluation of whole-building approaches and estimation of the relative contributions of select technologies toward reducing energy use related to space conditioning in new manufactured homes.