Skip to main content

Library

This library contains research reports produced by the Building America program and other building science resources used to support this Solution Center. The materials cover both new construction and existing homes. Use the search box and/or the filters to explore hundreds of residential building resources. Access to some references not produced by Building America may require purchase from the publisher. Documents are listed alphabetically. While we continually update our database, links may have changed since posting. Please contact our webmaster if you find broken links.

Showing results 1 - 48 of 48

Author(s)
ABTCO Vinyl Siding
Organization(s)
ABTCO Vinyl Siding
Publication Date
Description
Vinyl siding estimating and installation guide for vinyl siding products.
Author(s)
Hammer & Hand
Organization(s)
Hammer & Hand
Publication Date
Description
This Best Practices Manual is the product of Hammer & Hand’s ongoing work to document and internally codify our standard operating procedures for construction practice.
Author(s)
Mark Parlee
Organization(s)
The Building Consultant
Publication Date
Description
An article illustrating common errors found in fiber cement siding installations. Many of these errors and poor flashing examples apply to siding materials beyond fiber cement siding.
Author(s)
Kochkin,
Wiehagen
Organization(s)
Home Innovation Research Labs
Publication Date
Description
The Guide addresses walls constructed with 2x4 wood frame studs, wood structural panel sheathing (WSP) as wall bracing and added backing for foam sheathing, a layer of rigid foam sheathing insulation up to 1.5 inches thick over the WSP, and a cladding system installed over the foam sheathing in low...
Author(s)
Kochkin,
Wiehagen
Organization(s)
Home Innovation Research Labs
Publication Date
Description
Part I of the Guide addresses walls constructed with 2x6 wood frame studs, wood structural panel (WSP) sheathing as exterior sheathing, gypsum board as interior sheathing, and a cladding system installed over WSP sheathing in low-rise residential buildings up to three stories in height. Walls with...
Author(s)
Home Innovation Research Labs
Organization(s)
Home Innovation Research Labs
Publication Date
Description
Fact sheet describing flashing of roof penetrations to make a home more resistant to high winds, hurricanes, and rainwater intrusion.
Author(s)
Insurance Institute for Business & Home Safety
Organization(s)
IBHS
Publication Date
Description
Guide describing the requirements by FORTIFIED Home™ for improving the home's resistance in severe thunderstorms, straight-line wind events, and high winds at the outer edges of tornadoes.
Author(s)
Insurance Institute for Business & Home Safety
Organization(s)
IBHS
Publication Date
Description
Report summarizing the requirements to strenghthen new homes against property damage caused by high wind occurrences per the IBHS Fortified Homes High Wind Standard for New Homes.
Author(s)
Insurance Institute for Business & Home Safety
Organization(s)
IBHS
Publication Date
Description
Report summarizing the requirements to strenghthen new homes against property damage caused by high wind occurrences per the IBHS Fortified Homes High Wind Standard for Existing Homes.
Author(s)
Insurance Institute for Business & Home Safety
Organization(s)
IBHS
Publication Date
Description
Guide describing the requirements by FORTIFIED Home™ for improving the home's resistance in severe thunderstorms, straight-line wind events, and high winds at the outer edges of tornadoes.
Author(s)
Insurance Institute for Business & Home Safety
Organization(s)
IBHS
Publication Date
Description
Report summarizing the requirements for strenghtening and protecting the roof, openings in the house, and creating a continuous load path to strengthen walls and foundation per the IBHS Fortified Homes Hurricane Standard for Existing Homes.
Author(s)
Insurance Institute for Business & Home Safety
Organization(s)
IBHS
Publication Date
Description
Report summarizing the requirements for strenghtening and protecting the roof, openings in the house, and creating a continuous load path to strengthen walls and foundation per the IBHS Fortified Homes Hurricane Standard for New Homes.
Author(s)
Insurance Institute for Business & Home Safety
Organization(s)
IBHS
Publication Date
Description
Checklist providing information about the specific requirements of FORTIFIED Roof™ design and construction standard for re-roofing specific for high wind resistance.
Author(s)
Insurance Institute for Business & Home Safety
Organization(s)
IBHS
Publication Date
Description
Checklist providing information about the specific requirements of FORTIFIED Roof™ design and construction standard for re-roofing specific for high wind and hail resistance.
Author(s)
Insurance Institute for Business & Home Safety
Organization(s)
IBHS
Publication Date
Description
Checklist providing information about the specific requirements of FORTIFIED Roof™ design and construction standard for re-roofing specific for hurricane resistance.
Author(s)
Insurance Institute for Business & Home Safety
Organization(s)
IBHS
Publication Date
Description
Checklist providing recommendations for the right tape in order to reduce the risk of leaks during storms with wind-driven rain.
Author(s)
Insurance Institute for Business & Home Safety
Organization(s)
IBHS
Publication Date
Description
Webpage providing video links and Spanish/English handouts for installing roofs to meet the hurricane and high wind resistant guidance in the IBHS Fortified Home criteria.
Author(s)
Todd Fratzel
Organization(s)
Home Construction and Improvement
Publication Date
Description
A article about the best practice method of installing fiber cement siding, to install flashing at the butt joints of the siding boards, rather than face caulking the butt joints afterwards.
Author(s)
Mark Parlee
Organization(s)
Journal of Light Construction
Publication Date
Description
A story about how omission of two small but critical wall details, a kick-out flashing and a weep screed, lead to extensive water damage to a wall.
Author(s)
Ply Gem Siding Group
Organization(s)
Ply Gem Siding Group
Publication Date
Description
Siding installation guide for Ply Gem Siding Group products.
Author(s)
Grin,
Lstiburek
Organization(s)
Building Science Corporation,
BSC
Publication Date
Description
Measure Guideline research report providing simple, long term, and durable solutions when using tapes and flashing membranes in conjunction with the exterior face of rigid polymeric foam sheathing to create the drainage plane of a wall system.
Author(s)
Joseph Lstiburek
Organization(s)
Building Science Corporation,
BSC,
U.S. Department of Energy,
DOE
Publication Date
Description
Report providing extensive guidance on controlling moisture in building envelopes through proper selection and installation on air, water, thermal, and vapor barriers.
Author(s)
Building Science Corporation
Organization(s)
BSC
Publication Date
Description
Information sheet with details on pan flashing for exterior walls.
Author(s)
Fenestration Manufacturers Association,
American Architectural Manufacturers Association,
Window & Door Manufacturers Association
Organization(s)
FMA,
AAMA,
WDMA
Publication Date
Description
Guide describing the installation of windows in walls that have foam plastic insulating; guide provides several methods for attaching, supporting, and flashing windows in walls with rigid foam sheathing. (Note: The link only goes to the table of contents for the guide, the full guide can be...
Author(s)
Guertin Mike
Organization(s)
Fine Homebuilding Magazine
Publication Date
Description
Article describing ways to protect roofs from water infiltration by using self-adhering underlayment in vulnerable locations such as roof valleys, eave edges (to help deal with ice dams), rake edges, roofs to vertical walls (such as dormers), sidewall protection, the bottom of dormer valleys, and...
Author(s)
Lstiburek
Organization(s)
Building Science Corporation,
BSC
Publication Date
Description
Guide providing information about controlling rainwater through use of drainage planes.
Author(s)
Guertin Mike
Organization(s)
Fine Homebuilding Magazine
Publication Date
Description
Article describing a method for flashing roof vent boots, describing how to flash the pipe, how to flash over and under the pan, and finish by shaping the shingles, as well as addressing potential water leakage by adding an additional seal with EPDM flashing tape with a butyl adhesive backing to the...
Author(s)
Smegal,
Lstiburek
Organization(s)
Building Science Corporation
Publication Date
Description
Report summarizing current research, summarizes issues that have been experienced with current best practices, and recommends ways in which the best practices can be improved for water managing sheathings.
Author(s)
Federal Emergency Management Agency
Organization(s)
FEMA
Publication Date
Description
Fact sheet describing ways to properly flash windows and doors to resist water intrusion in coastal environments; also published in FEMA P-499 “Home Builder’s Guide to Coastal Construction: Technical Fact Sheet Series.”